User manual CARROM SHUFFLE BOARD

[. . . ] Do NOT remove the clear plastic starter sheet this will be ejected while the machine is warming up. Starter Sheet A. Attach the plastic document and paper support to the multi-purpose sheet feeder. C. If your paper size is A4 or Letter, unfold the paper stopper by pulling it toward you. Do NOT remove the Starter Sheet! D. Close the top cover. (For A4/letter paper) 4 Load Paper 5 Press and slide A. [. . . ] Make sure the print side is toward the fax machine and the paper level is stacked below the paper mark. The feeder can hold up to 200 sheets of paper, or up to 10 envelopes. Load the paper with the lever down Telephone Line Cord (Example for the U. K. ) . TAD TAD EXT E LIN (Example for the U. K. ) External Telephone Extension Telephone Complete reading this guide before connecting the Parallel or USB cables. 7 Selecting Receive Mode 8 Set Date and Time 1 9 Set Station ID 1 Choose the mode that best suits your needs by pressing Receive Mode repeatedly until the screen displays the setting you want to use. FAX ONLY A. Press Menu/Set, FAX: , 2 . 1. DATE/TIME 2. STATION ID For use with a dedicated fax line. Enter the last two digits of the year and press Menu/Set. MONTH:XX B. Enter your telephone number, then press Menu/Set. NAME: For receiving fax and voice calls on one line. The machine answers every call and receives a fax or pseudo rings for you to pick up a voice call. TAD:ANSWER MACH. C. Enter two digits for the month and press Menu/Set. DAY:XX For use with an external answering device. Enter your name using the dial pad and the chart below, then press Menu/Set. For more details, see Entering Text in Owner’s Manual. Press Key 2 3 4 5 6 7 8 9 once A D G J M P T W twice B E H K N Q U X three times four times five times C F I L O R V Y 2 3 4 5 6 S 8 Z A D G J M 7 T 9 E. Note: If you can’t step forward, press Stop/Exit and repeat from Step A. You control the phone line and must answer every call yourself. Connect the interface cable to the printer port of the computer and secure it with the two screws. For the location of your computer’s parallel printer port, see the User’s Guide for your computer. For Parallel interface cable users Step 5. Follow the instructions on the screen. ( For Windows® 2000 Professional User ) ( For Windows® 95/98/98SE/Me Users ) 1. In the Connect Cable window, click Next. 2. When the above screen appears, click Finish and wait as the PC restarts Windows® and continues the installation. 1. In the Connect Cable window, click Next. 2. When the above screen appears, Click Finish and wait as the PC restarts Windows® and continues the installation. 3. Click Yes to have the Control Centre loaded each time Windows® is started. *3 The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. 3. When the Digital Signature Not Found dialog boxes appear, click Yes to install the driver. 4. Click Yes to have the Control Centre loaded each time Windows® is started. *3 The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. Step 4. Step 5. Step 6. For USB interface cable users Turn on the MFC by plugging in the power cord. Connect the MFC to your PC with the USB cable (it will take a few seconds for the installation screen to appear). Follow the instructions on the screen. ( For Windows® 98/98SE/Me Users ) ( For Windows® 2000 Users ) 1. In the Add Printer Wizard window, select BRUSB: USB Printer Port, and then click Next. 2. Accept the default Printer name by selecting Yes, and then click Next. 3. Select Yes (recommended), and then click Finish. A test page will be printed so you can check the print quality. 1. When the Digital Signature Not Found dialog boxes appear, click Yes to install the driver. 4. If the test page is printed correctly, click Yes. If you click No, follow the prompts on the screen to correct the problem. 5. Select Yes to restart your computer, and then click Finish. 6. Click Yes to have the Control Centre loaded each time Windows® is started. [. . . ] If you click No, follow the prompts on the screen to correct the problem. 5. Select Yes to restart your computer, and then click Finish. 6. Click Yes to have the Control Centre loaded each time Windows® is started. *3 2. Select Finish to restart your computer. 3. Click Yes to have the Control Centre loaded each time Windows® is started. *3 The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. –3– For Windows NT® Workstation Version 4. 0 Users Step 1. Check that your computer is turned on. Step 3. Select Yes to restart your computer, and then click Finish. You must be logged on as the Administrator. Step 2. A. [. . . ]