User manual CARROM 748-02

[. . . ] 7 Setting a Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Step 2 Installing the Driver & Software Supplied CD-ROM (MFL-Pro Suite). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 For Windows® 98/98SE/Me/2000 Professional/XP Users. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 ■ For Windows® 98/98SE/Me Users Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If you do so, it may reduce the ink quantity and the DCP will not know the quantity of ink left in the cartridge. Protective Cartridge Do not throw away the yellow plastic protective cartridges. You will need them in the future to transport the machine. 4 7 • DO NOT shake the ink cartridges. If ink stains your body or clothing, wash with soap or detergent immediately. • Brother multifunction machines are designed to work with ink of a particular specification and work to a level of optimum performance when used with genuine Brother ink cartridges. Brother cannot guarantee this optimum performance if ink or ink cartridges of other specifications are used. Brother does not therefore recommend the use of cartridges other than genuine Brother cartridges with this machine or the refilling of empty cartridges with ink from other sources. If damage is caused to the print head or other parts of this machine as a result of the use of ink or ink cartridges other than genuine Brother products due to the incompatibility or lack of suitability of those products with this machine, any repairs required as a result will not be covered by the warranty. If you do so, the ink may seep out of the cartridge. Colour Block Quality and Alignment Check After the cleaning cycle is finished, the LCD shows; Setting Up the DCP 1 SET PAPER AND PRESS COLOUR CPY 2 3 Make sure the paper is loaded in the paper tray. The DCP starts printing the PRINT QUALITY CHECK SHEET (only during initial ink cartridge installation). Windows® Check in Step A Check in Step B To be continued If you mix the colours by installing an ink cartridge in the wrong position, you must clean the print head by running several cleaning cycles after correcting the cartridge installation. (See “Cleaning the print head” in Chapter 15 of the User’s Guide. ) 5 Mac® OS X 10. 1/10. 2. 1 or greater Mac® OS 8. 6-9. 2 Step 1 Setting Up the DCP Step A: Colour Block Quality Check Step B: Alignment Check 1 The LCD shows: 1 The LCD shows: IS STEP "A" OK?1. YES 2. NO Check the quality of the four colour blocks formed by the short lines printed on the sheet. Go to page 18 Windows® For Windows® 98/98SE/Me/2000 Professional/XP Users. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Go to page 10 Setting Up the DCP Step 2 Installing the Driver & Software For Windows® 98/98SE/Me/2000 Professional/XP Users Make sure that you have completed the instructions from Step 1 “Setting Up the DCP” on pages 2 to 7. If you have previously installed the MFL-Pro Suite, you will first have to uninstall it. From the Start menu, select Programs, Brother, Brother MFL-Pro Suite, Uninstall, and then follow the instructions on the screen. Make sure any media cards are not inserted into the media drive of the DCP. 1 Unplug the DCP from the AC outlet and disconnect it from your computer, if you already connected an USB cable. If you are using Windows® 2000 Professional: To access the PhotoCapture Centre™ features from your PC you may have to install a Windows® 2000 update first. Install the Windows® 2000 update from the MFL-Pro Suite installer. After the PC restarts, the installation will automatically continue. If the installation does not continue automatically, please open the MFL-Pro Suite installer menu again by double-clicking the setup. exe program from the root directory of the Brother CD-ROM, and continue from Step 4 to install the MFL-Pro Suite. 2 3 Turn on your computer. (For Windows® 2000 Professional/XP, you must be logged on as the administrator. ) Insert the supplied CD-ROM into your CD-ROM drive. 4 5 Click your language. Turn on the DCP by plugging in the power code. I Accept the default Printer name by selecting Yes, and then click Next. J . Select Yes (recommended), and then click Finish. A test page will be printed so you can check the print quality. K If the test page is printed correctly, click Yes. If you click No, follow the prompts on the screen to correct the problem. It will take a few seconds for the installation screen to appear. Follow the instructions on the screen. H L Select BRUSB: USB Printer Port, and then click Next. The README. WRI file will be displayed. [. . . ] Click Install Software. 3 Click PhotoPrinter® 4 in the Optional Applications menu and follow the on-screen instructions to complete the installation. 17 Installing the Driver & Software If this window does not appear, use Windows® Explore to run the setup. exe program from the root directory of the Brother CD-ROM. Windows® Setting Up the DCP Installing Optional PhotoPrinter® 4 Software Step 2 Installing the Driver & Software For Mac® OS 8. 6 - 9. 2 Users Make sure that you have completed the instructions from Step 1 “Setting Up the DCP” on pages 2 to 7. 1 Unplug the DCP from the AC outlet and disconnect it from your Macintosh® if you already connected an interface cable. 6 Connect the USB interface cable to your Macintosh®, and then connect it to the DCP. Do not connect the DCP to a USB port on a keyboard or a non powered USB hub. 2 3 Turn on your Macintosh®. Insert the supplied CD-ROM into your CD-ROM drive. 7 Turn on the DCP by plugging in the power cord. 4 Double-click the MFL-Pro Suite Driver Installer icon to install the printer and scanner drivers. 8 From the Apple® menu, open the Chooser. 5 After the installation is completed, restart your Macintosh®. 18 9 Click the MFL-Pro Color icon you installed. On the right side of the Chooser, select the printer to which you want to print. Close the Chooser. Installing Optional PhotoPrinter® 4 Software 1 Insert the supplied CD-ROM into your CD-ROM drive. 2 Double-click the ArcSoft folder. 3 Double-click the appropriate language folder. Installing the Driver & Software 19 The Brother Printer and Scanner drivers have been installed and the installation is now complete. 4 Double-click the PhotoPrinter Installer icon and follow the on-screen instructions to complete the installation. Mac® OS 8. 6-9. 2 Setting Up the DCP Step 2 Installing the Driver & Software For users of Mac® OS X 10. 1 / 10. 2. 1 or greater Make sure that you have completed the instructions from Step 1 “Setting Up the DCP” on pages 2 to 7. 1 Unplug the DCP from the AC outlet and disconnect it from your Macintosh® if you already connected an interface cable. 6 Connect the USB interface cable to your Macintosh®, and then connect it to the DCP. Do not connect the DCP to a USB port on a keyboard or a non powered USB hub. 2 3 Turn on your Macintosh®. [. . . ]