User manual CANON PIXMA MP110 START HERE

[. . . ] Start Here Easy Setup Instructions 1 Unpack and setup the machine. 1 2 Carefully remove all items from the box. Remove the protective material. 3 Install the print head. 1 2 3 Lift the Scan Unit until it locks into place. [. . . ] Load the paper with the print side face up. · Ensure the paper stack does not exceed Paper Limit Mark. 2 3 Pinch and adjust the Paper Guide to the width of the stack. (1) · The language and country setting are only available for some countries. 3 If the message <PUT IN CARTRIDGE> appears, go to Step 3, "Install the print head. " (2) Setup is complete. If you are connecting the machine to a computer for use, see the reverse side for instructions on installing the software. Canon and BCI are registered trademarks and PIXMA is a trademark of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. 2004 PRINTED IN CHINA 6 Install the software. IMPORTANT · Close any open software applications, including virus checkers prior to installing the software. Step 4 Connect the USB cable. · Make sure your machine and computer are turned ON. · When connecting the USB cable, the computer will automatically detect and install necessary information. · In Windows 2000, the machine may not be set as the default printer. There are two ways you can install the software: Easy Install or Custom Install. Easy Install is recommended for the first-time users, and Custom Install is for the advanced users. This sheet explains Easy Install only. The following software programs are included on the Setup CD-ROM: · On-screen Manual · Easy-PhotoPrint · MP Drivers · ArcSoft PhotoStudio · MP Navigator · ScanSoft OmniPage SE IMPORTANT · Do not connect the USB cable until Step 4, "Connect the USB cable. " IMPORTANT · When installing the software, you must log on as a user with Administrator privileges. · Mac OS X Classic users: This machine does not support the Mac OS X Classic environments. · MP Navigator · ArcSoft PhotoStudio The following software programs are included on the Setup CD-ROM: · On-screen Manual · Easy-WebPrint · ScanSoft OmniPage SE · MP Drivers · Easy-PhotoPrint Step 1 Connect the USB cable. · Make sure the machine is turned ON. IMPORTANT · If you have an earlier version of the MultiPASS Suite software installed on your computer, uninstall this version before installing the new version. For instructions on uninstallation, see the guides for that version of MultiPASS Suite. · When installing the software in Windows 2000, you must log on as Administrator or have Administrator privileges, and when installing the software in Windows XP, you must log on as Administrator. Step 2 Prepare the Setup CD-ROM. 2 Insert the Setup CD-ROM into the CD-ROM drive. · The setup program should automatically run. [. . . ] Follow the on-screen instructions to install the software. 3 Click [Restart] to restart your computer. 2 Click [Yes]. · Installation begins. Follow the on-screen instructions to install the software. 3 Click [Exit]. · If prompted, restart your computer. You now have completed installation of the software. [. . . ]