User manual BREVILLE VCF126X01 BARISTA MAX

[. . . ] Read carefully and save all the instructions provided with an appliance. Do not remove the Group Handle during the espresso pour or water flow as the unit is under pressure. Removing the Group Handle during either of these operations can lead to a scalding or injury. The Steam & Hot Water Wand becomes very hot during texturing milk and water flow. [. . . ] Note: Do not use alkaline cleaning agents, abrasives or metal scourers, as these will scratch the surfaces of parts. Wipe over the machine with a soft damp cloth with a mild detergent and wipe dry. CAUTION: To prevent damage to the appliance do not use alkaline cleaning agents, abrasives or metal scourers. Every Time Wash after each use by rinsing them with warm water under the tap. - With the Cleaning Brush remove any Coffee grinds from around the Group Head inside rim and Silicone Seal. - Place the Two Cup Filter Basket & the Cleaning Disc into the Group Handle. - Place one Cleaning Tablet in the middle of the Cleaning Disc in the space provided. - Simultaneously press & hold the ON/ OFF & MANUAL SHOT BUTTONS for 4 seconds. Note: The Cleaning Cycle can be exited at any point by pressing the ON/OFF BUTTON. - The ON/OFF & CLEAN LIGHTS will flash during the cleaning cycle. - Water will purge into the Drip Tray and small amounts of water will pour from the Group Handle spouts. Note: If the tablet has not been dissolved, insert the Group Handle back into the Group Head, empty the Drip Tray & replace. - Purge the Group Head by pressing the ONE CUP BUTTON and water should flow. - Wash the Drip Tray, Group Handle & Cleaning Disc in warm water with a mild detergent, rinse & dry. group Head Silicone Seal A Silicone Seal is located in the Group Head and creates a seal against the Filter basket when making an espresso. Important: When not being used, we recommend not to leave the Group Handle inserted into the Group Head, as this will reduce the life of the Silicone Seal. The seal may need replacing when watery espresso leaks from around the Group Handle during extraction, or if the Group Handle is loose when fully turned to the centre position. Note: Contact Breville should you think that the Group Head Seal needs replacing. Do not attempt to change the Silicone Seal without first consulting Breville. Every time - After texturing milk purge the Steam Wand by turning the DIAL to HOT WATER for just 1-2 seconds. 2-3 Months - Soak the Steam Wand overnight in the Milk Jug with warm water & one Cleaning Tablet. eMCSTAPLACERBAHELNSINESINTEOSG - In the morning remove the Jug and rinse ensuring that all traces of the solution have been removed. [. . . ] The GRINDER LIGHT will illuminate white to indicate normal use can be resumed. Are coarse when on a fine Grind Setting Coffee beans or grinds are caught around & under the Top Burr. Problem Espresso is under extracted even with a fine coffee grind grind Setting cannot be adjusted Bean Hopper cannot be locked into position Top Burr does not sit in the Grinder Collar correctly Bottom Burrs needs adjusting. Old coffee beans, no matter the Grind Setting, will have a fast extraction and will produce an under extracted tasting espresso. [. . . ]