User manual BREVILLE CAFE ROMA

[. . . ] For any maintenance other than cleaning, call Breville Customer Service at 1-866-BREVILLE. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. Allow to cool before putting on or taking off parts, and before cleaning the appliance. [. . . ] When rubbed between your fingertips, it will slightly stain them while keeping its granular consistency. If the grind is too fine, the water will not flow through the espresso even under pressure (this grind looks like powder and feels like flour when rubbed between fingers). If the grind is too coarse, water will pass through the grinds too quickly, resulting in espresso that is under-extracted and lacking flavor. Place the 1 or 2 cup filter into the filter holder (use the smaller filter for 1 cup / 1oz and the larger filter for 2 cups / 2oz or 2 singles at the same time). When brewing for a mug of coffee always use the 2 cup filter and only extract 2 oz. If you require a larger coffee, add the hot water first and then brew the espresso. Use 1 level measure of ground espresso coffee for the 1 cup filter and 2 level measures for the 2 cup filter. It is important to use the correct amount of ground espresso for each filter as the filter perforations have been constructed to utilize the pressure in the machine to extract optimal flavor with each extraction. Clean any excess espresso grinds from the rim of the filter holder to ensure a proper fit under the brew head. Place the filter holder underneath the brew head so that the handle is positioned to the left of center. Lift the filter holder until it contacts the brew head and slowly rotate to the right. Distribute the espresso grinds evenly and press it lightly with the bottom of the measuring spoon (if there is too much espresso grind, the flow of water can become blocked Brewing Espresso 1. As soon as the orange `HEATING' light turns off, the machine is heated up. When brewing into two cups at the same time, no more than 1oz should be extracted into either cup. When sufficient espresso has flowed into the cups, set the selector control to the `STAND BY' position. If you do not need to use the steam function, set the power switch to the `STAND BY' position, unplug the power cord and allow the machine to cool. The machine remains ready for brewing and maintains a constant heating temperature as long as the Power switch is left in the `On' position. If the temperature should drop, the orange control light will illuminate and the heater will automatically heat up to the correct brewing temperature. Preparing Espresso Pods Your Café Roma can be used with most leading brands of espresso pods. To prepare the pod for brewing, place the pod in the pod filter and ensure that all of the pod's surface area is fitted inside the filter. If the edges of the pod overflow the filter, you will need to trim them off until the pod is fully contained within the filter. How to Froth Milk for a Cappuccino or Latte The Breville Café Roma comes complete with a steam wand. [. . . ] Milk is not foamy after frothing Breville ®* warrants this Breville ® appliance against defects that are due to faulty material or workmanship for a period of one (1) year from the date of original consumer purchase. This warranty does not cover damage from abuse, neglect, use for commercial purposes, or any other use not found in the printed "Instructions for use" booklet. There is no warranty for glass parts, glass containers, filter basket, blades and agitators. HWI Breville ® expressly disclaim all responsibility for consequential damages for incidental losses caused by use of this appliance. [. . . ]