User manual BOSCH WFR 2460

[. . . ] WFR 2450 Axxis+ WFR 2460 Axxis+ am Operating, Care and Installation Instructions Table of Contents IMPORTANT SAFETY INSTRUCTIONS . 5 5 5 5 5 6 7 8 8 8 9 9 9 9 11 12 12 12 13 13 13 14 14 15 16 17 17 18 19 20 21 22 23 24 25 During Washing . . 26 26 26 27 27 27 27 28 29 User Maintenance Instructions User Maintenance Instructions . 30 30 30 30 30 31 32 33 34 35 38 Installation Instructions Installation, Connection and Transportation . [. . . ] 21 Child lock You can secure your washing machine to prevent selected functions from being inadvertently changed. If the child lock has been selected: No changes can be made while the program is running, Should the appliance be switched off and on while a program is running the program will continue at the point at which it was interrupted, The door remains locked at the end of the program, Directly after the appliance is switched on provided no program was active the last time the appliance was switched off - all control elements are disabled and the door is locked. Example: - i If the child lock is active and the program selector is rotated while a program is running, the indicator light of the program selector is turned off. The indicator light illuminates again when the program selector is returned to its original position. i When a program has started, you can activate the child lock in Pause" mode only. Activating the child lock q Turn the program selector to the desired program. The Start/Pause indicator light flashes (red). q Press the Menu button until Child lock: OFF" is displayed. i The menu is being left if a button is not pressed within 10 seconds. q Press the Select button until Child lock: ON" is displayed. i The child lock is not activated until the Start/Pause button is pressed. The Start/Pause indicator light is permanently illuminated (yellow). 22 You can change other settings or Standard time/Daylight saving time You can switch from winter to Daylight saving time. Deactivating temporarily the child lock q Press the Start/Pause button and hold down (5 seconds) until the Start/Pause indicator light flashes. i When Pause" is displayed, the child lock is temporarily deactivated. i When the Start/Pause button is pressed again, the child lock is re activated. Deactivating permanently the child lock q If required, press the Start/Pause button and hold down (5 seconds) until the Start/Pause indicator light flashes. q Press the Select button and select Daylight saving time" or Standard time". q Press the Menu button until Standard time" or Daylight saving time" is displayed. i The menu is being left if a button is not pressed within 10 seconds. 23 You can change other settings or Example: q Press the Start/Pause button. i The individual program steps are indicated in the display field. q Press the Menu button until Set clock:" is displayed. i The menu is being left if a button is not pressed within 10 seconds. Set clock You can set the current time. The settings are retained even if your washing machine is not used for up to 6 weeks. The Start/Pause indicator light flashes (red). q Press the Select button until the hour display is correct. 24 You can change other settings or q Press the Menu button until the minute display flashes. The Start/Pause indicator light flashes (red). q Press the Start/Pause button. i The individual program steps are indicated in the display field. Resetting the settings You can reset all changed settings to the standard settings except time and language. [. . . ] 10 mm or Cold water connection only with Y piece q Use the U bracket. Attach the U bracket to the end of the hose and insert end of hose into standpipe or wall drain. q Use a strap or cable tie connected to U bracket to hold hose in place. 10 mm q After the connection: Turn on the water completely, and check whether connection points are watertight. CAUTION The connection points are under full water pressure. [. . . ]