User manual BOSCH UNEO

[. . . ] 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. [. . . ] Products sold in GB only: Your product is fitted with an BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362). If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorised customer service agent. the replacement plug should have the same fuse rating as the original plug. The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. It is also suitable for drilling without impact in wood, metal, ceramic and plastic. Machines with electronic control and right/left rotation are also suitable for screwdriving. Use the battery charger only when you fully understand and can perform all functions without limitation, or have received appropriate instructions. Cordless Rotary Hammer Article number Rated voltage Rated speed Impact rate Impact energy per stroke according to EPTA-Procedure 05/2009 Tool holder Max. ­ Concrete (with twist drill) ­ Steel ­ Wood Weight according to EPTA-Procedure 01/2003 Battery Capacity Number of battery cells Battery Charger Article number 2 607 225 463 (EU) 2 607 225 465 (UK) 2 607 225 641 (AU) h 3 Ah V= min 1 SDS-Quick tool holder 2 Dust protection cap 3 Locking sleeve 4 Selector switch for drilling/hammer drilling 5 Battery charge-control indicator 6 Indicator for right rotation 7 Indicator for left rotation 8 Rotational direction switch 9 On/Off switch 10 Universal bit holder* 11 Screwdriver bit* 12 Screwdriver bit with ball catch* 13 Drill bit with hexagon shank* 14 Drill bit with SDS-Quick tool holder* 15 Handle (insulated gripping surface) 16 Socket for charge connector 17 Charge connector *Accessories shown or described are not part of the standard delivery scope of the product. A complete overview of accessories can be found in our accessories program. Typically the A-weighted noise levels of the product are: Sound pressure level 84 dB(A); Sound power level 95 dB(A). English | 19 Vibration total values (triax vector sum) determined according to EN 60745: Hammer drilling into concrete: Vibration emission value ah=20 m/s2, Uncertainty K=1. The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. the declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. ) as well as during transport and storage, set the rotational direction switch to the centre position. The voltage of the power supply must correspond with the data given on the nameplate of the battery charger. [. . . ] Com Only for EC countries: Defective or dead out battery packs/batteries must be recycled according the guideline 2006/66/EC. Batteries no longer suitable for use can be directly returned at: Great Britain Robert Bosch Ltd. Com When removing the battery from the machine, actuate the On/Off switch 9 until the battery is completely discharged. Only for EC countries: According the European Guideline 2002/96/EC for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally correct manner. [. . . ]