User manual BOSCH PSR 14.4 LI

[. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. B) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. unmodified plugs and matching outlets will reduce risk of electric shock. [. . . ] 1 Screwdriver bit* 2 Keyless chuck 3 Torque preselection ring 4 Indicator for right rotation 5 Indicator for left rotation 6 Battery 7 "Power Light" 8 Battery charge-control indicator 9 Rotational direction switch 10 On/Off switch 11 Battery unlocking button 12 Universal bit holder* 13 Securing screw for keyless chuck 14 Allen key* Cordless Screwdriver Article number Rated voltage No-load speed Max. Typically the A-weighted sound pressure level of the product is less than 70 dB(A). Vibration total values (triax vector sum) determined according to EN 60745: Drilling into metal: Vibration emission value ah <2. The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. the declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. We declare under our sole responsibility that the product described under "Technical Data" is in conformity with the following standards or standardization documents: EN 60745 according to the provisions of the directives 2004/108/EC, 98/37/EC (until Dec. Only these battery chargers are matched to the lithium ion battery of your power tool. To ensure full capacity of the battery, completely charge the battery in the battery charger before using your power tool for the first time. The lithium ion battery can be charged at any time without reducing its service life. When the battery is empty, the machine is switched off by means of a protective circuit: The inserted tool no longer rotates. Do not continue to press the On/Off switch after the machine has been automatically switched off. The locking is released again to remove the tool when the collar is turned in the opposite direction. ) as well as during transport and storage, set the rotational direction switch to the centre position. The keyless chuck 2 is secured with a securing screw 13 against unintentional loosening from the drill spindle. Completely open the keyless chuck 2 and unscrew the securing screw 13 in rotation direction . If the securing screw 13 is seated tightly, apply a screwdriver to the screw head and loosen the securing screw by giving a blow onto the handle of the screwdriver. Removing the Drill Chuck (see figure D) Clamp the short end of an Allen key 14 into the keyless chuck 2. [. . . ] In all correspondence and spare parts order, please always include the 10-digit article number given on the type plate of the machine. The 3 LEDs of the battery charge-control indicator 8 and the Power Light 7 flash rapidly when the battery temperature is not within the operting temperature range of ­10 to +70°C. Temperature Dependent Overload Protection When using as intended for, the power tool cannot be subject to overload. When the load is too high or the allowable battery temperature of 70 °C is exceeded, the electronic control switches off the power tool until the temperature is in the optimum temperature range again. [. . . ]