User manual BOSCH PSR 10.8 LI-2 REV 4-2010

[. . . ] Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. This enables better control of the power tool in unexpected situations. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. [. . . ] In accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. Have your power tool serviced by a qualified repair person using only identical replacement parts. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory or fastener may contact hidden wiring. Cutting accessory and fasteners contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. Use appropriate detectors to determine if utility lines are hidden in the work area or call the local utility company for assistance. Penetrating a water line causes property damage or may cause an electric shock. 12 | English Switch off the power tool immediately when the tool insert jams. The tool insert jams when: -- the power tool is subject to overload or -- it becomes wedged in the workpiece. High reaction torque can briefly occur while driving in and loosening screws. A workpiece clamped with clamping devices or in a vice is held more secure than by hand. In case of damage and improper use of the battery, vapours may be emitted. Use only original Bosch batteries with the voltage listed on the nameplate of your power tool. Imitations, reconditioned batteries or other brands, there is danger of injury as well as property damage through exploding batteries. Dusts from materials such as lead-containing coatings, some wood types, minerals and metal can be harmful to one's health and cause allergic reactions, lead to respiratory infections and/or cancer. ) as well as during transport and storage, set the rotational direction switch to the centre position. To ensure full battery capacity, completely charge the battery in the battery charger before using for the first time. If the gear switch cannot be pushed to the stop, turn the drill chuck a little. The battery charge-control indicator indicates the charge condition of the battery for a few seconds when the On/Off switch is pressed half or fully through. LED Continuous lighting, green Continuous lighting, orange Continuous lighting, red Flashing light, red Capacity 66% 33--66% 11--33% 11% The following symbols are important for reading and understanding the operating instructions. The correct interpretation of the symbols will help you to use the machine in a better and safer manner. Read all safety warnings and all instructions Movement direction Before any work on the machine itself, remove the battery Reaction direction Weight according to EPTA-Procedure 01/2003 Sound pressure level Vibrational emission value Battery, application tools and other accessories shown or described are not part of the standard delivery scope. [. . . ] Com Our customer service representatives can answer your questions concerning possible applications and adjustment of products and accessories. In all correspondence and spare parts order, please always include the 10-digit article number given on the type plate of the machine. Tape or mask off open contacts and pack up the battery in such a manner that it cannot move around in the packaging. When dispatching lithium-ion batteries, compulsory labeling may be required. [. . . ]