User manual BOSCH PSR 10,8 LI

[. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. B) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. English | 33 b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. [. . . ] the replacement plug should have the same fuse rating as the original plug. The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. The machine is intended for driving in and loosening screws as well as for drilling in wood, metal, ceramic and plastic. Use the machine only when you can fully assess all functions and handle them without limitation, or after having received appropriate instructions. 1 Screwdriver bit* 2 Keyless chuck 3 Torque preselection ring 4 Indicator for right rotation 5 Battery charge-control indicator 6 Indicator for left rotation 7 "Power Light" 8 Rotational direction switch 9 On/Off switch 10 Battery charger 11 Universal bit holder* 12 Securing screw for keyless chuck 13 Allen key* *Accessories shown or described are not part of the standard delivery scope of the product. A complete overview of accessories can be found in our accessories program. ­ Steel ­ Wood Chuck clamping range Weight according to EPTA-Procedure 01/2003 Battery Capacity Number of battery cells Battery Charger Article number 2 607 225 489 (EU) 2 607 225 491 (UK) 2 607 225 611 (AUS) Charging time h 3. 0 Please observe the article number on the type plate of your machine. Typically the A-weighted sound pressure level of the product is less than 70 dB(A). Vibration total values (triax vector sum) determined according to EN 60745: Drilling into metal: Vibration emission value ah <2. The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. the declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. We declare under our sole responsibility that the product described under "Technical data" is in conformity with the following standards or standardization documents: EN 60745 (battery powered product) and EN 60335 (battery charger) according to the provisions of the directives 2006/95/EC, 2004/108/EC, 98/37/EC (until 28 Dec 2009), 2006/42/EC (from 29 Dec 2009). The voltage of the power supply must correspond with the data given on the nameplate of the battery charger. To ensure full capacity of the battery, completely charge the battery in the battery charger before using your power tool for the first time. The lithium ion battery can be charged at any time without reducing its service life. [. . . ] For safe and proper working, always keep the machine and ventilation slots clean. English | 51 When the battery is no longer operative, please refer to an authorised after-sales service agent for Bosch power tools. If the replacement of the supply cord is necessary, this has to be done by Bosch or an authorized Bosch service agent in order to avoid a safety hazard. If the machine should fail despite the care taken in manufacturing and testing procedures, repair should be carried out by an after-sales service centre for Bosch power tools. [. . . ]