User manual BOSCH PSM VENTARO 1400 REV 8-2009

[. . . ] Safety instructions for the sander with the vacuum cleaner Keep the vacuum cleaner away from rain and moisture. water entering the vacuum cleaner increases the risk of an electric shock. Stay alert, watch what you are doing and use common sense when working with the sander. Do not use the machine while tired or under the influence of drugs, alcohol or medication. [. . . ] This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. Typically the A-weighted sound pressure level of the product is 77 dB(A). Vacuum cleaner We declare under our sole responsibility that the product described under "Technical Data" is in conformity with the following standards or standardization documents: EN 60335 according to the provisions of the directives 2006/95/EC, 2004/108/EC. Open the closing flap 16 and guide the dust bag 18 from the top into the guide 17 as shown in the figure. when removing a full dust bag , ensure that the dust bag enclosure is clean. Multi Sander We declare under our sole responsibility that the product described under "Technical data" is in conformity with the following standards or standardization documents: EN 792 according to the provisions of the directives 98/37/EC (until 28 Dec 2009), 2006/42/EC (from 29 Dec 2009). Pay attention that the bypass valve 15 is never restricted or blocked. 20 | English Vacuuming Function The vacuum cleaner 4 can be used to vacuum dry, non-hazardous materials. You will hear a distinct "click" when the vacuum hose locks in the vacuum hose connection. You can connect the multi sander 1 or any of the accessories mentioned on the accessories page to the vacuum hose 3. blower Function The vacuum cleaner 4 can easily be converted to a blower in no time at all. Remove the closing cover with blower filter 12 from the holder 10 and insert the adapter for the blower connection 11 in its place. align the arrows of the vacuum hose 3 and the adapter for the blower connection 11 and insert the vacuum hose into the adapter. You will hear a distinct "click" when the vacuum hose locks in the adapter. Removing the Vacuum Hose To remove the vacuum hose 3, rotate the hose a little and pull it off. ensure that a dust bag is inserted in the vacuum cleaner when sanding. To remove the vacuum hose 3, rotate the hose a little and pull it off. When attaching a new sanding sheet, remove any dust or debris from the sanding plate 24 (e. To ensure optimum dust extraction, pay attention that the punched holes in the sanding sheet match with the holes in the sanding plate. The sanding plate 24 is fitted with Velcro backing for quick and easy fastening of sanding sheets with Velcro adhesion. Before attaching the sanding sheet 25, free the Velcro backing of the sanding plate 24 from any debris by tapping against it in order to enable optimum adhesion. [. . . ] When using the multi sander, replace the dust bag as soon as the sanding performance decreases. If the multi sander or vacuum cleaner should fail despite the care taken in manufacturing and testing procedures, repair should be carried out by an after-sales service centre for Bosch power tools. In all correspondence and spare parts orders, please always include the 10-digit order number given on the nameplate of the multi sander or vacuum cleaner. Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. [. . . ]