User manual BOSCH PSB 650 RE

[. . . ] 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. [. . . ] the declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. 1 Keyless chuck 2 Spindle lock button(PSB 600 RE/ PSB 650 RE/PSB 650 RA) 3 "Drilling/Impact Drilling" selector switch 4 Rotation direction indicator(PSB 600 RE/ PSB 650 RE/PSB 650 RA) 5 Lock-on button for On/Off switch 6 On/Off switch 7 Thumbwheel for speed preselection (PSB 600 RE/PSB 650 RE/PSB 650 RA) 8 Rotational direction switch 9 Extraction device with dust collector and depth stop * 10 Wing bolt for adjustment of auxiliary handle * 11 Auxiliary handle* 12 Telescopic guide with depth stop scale * 13 Set collar for depth stop* 14 Release button for dust collector * 15 Dust collector* English | 19 An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. Impact Drill Article number Rated power input Output power No-load speed Rated speed Impact rate Rated torque Torque at max. Output power Speed preselection Right/left rotation Spindle lock Dust extraction Spindle collar dia. ­ Concrete ­ Steel ­ Wood ­ with extraction device mounted Chuck clamping range Weight according to EPTA-Procedure 01/2003 ­ with extraction device ­ without extraction device Protection class mm mm mm mm mm mm 43 13 10 20 13 2. For lower voltage and models for specific countries, these values can vary. We declare under our sole responsibility that the product described under "Technical Data" is in conformity with the following standards or standardization documents: EN 60745 according to the provisions of the directives 2004/108/EC, 98/37/EC (until Dec. To achieve optimum extraction results, please observe the following notes: ­ Pay attention that the extraction device faces flush against the workpiece or the wall. ­ When using the extraction device, always work with the maximum speed. ­ After reaching the desired drilling depth, pull the drill bit out of the drill hole first and then switch off the impact drill. ­ The dust protection ring 16 can wear, especially when working with large drill-bit diameters. Mounting the Extraction Device Guide the extraction device 9 from the front toward the bottom side of the impact drill. Pay attention that the extraction device 9 faces flush against the casing and that it is locked. Dusts from materials such as lead-containing coatings, some wood types, minerals and metal can be harmful to one's health. Touching or breathing-in the dusts can cause allergic reactions and/or lead to respiratory infections of the user or bystanders. Certain dusts, such as oak or beech dust, are considered as carcinogenic, especially in connection with wood-treatment additives (chromate, wood preservative). English | 21 Cleaning the Extraction Device (see figure A) Attach the locking latch 17 or empty the dust collector 15 before placing down the extraction device. When the extraction force diminishes or when the level indicator 20 is full, the dust collector 15 must be emptied. [. . . ] In all correspondence and spare parts order, please always include the 10-digit article number given on the type plate of the machine. Only for EC countries: Do not dispose of power tools into household waste!According the European Guideline 2002/96/EC for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally correct manner. Nedan använt begrepp "Elverktyg" hänför sig till nätdrivna elverktyg (med nätsladd) och till batteridrivna elverktyg (sladdlösa). [. . . ]