User manual BOSCH PSB 1000 RCA

[. . . ] 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. [. . . ] Machines with electronic control and right/left rotation are also suitable for screwdriving and thread-cutting. 1 Keyless chuck 2 Wing bolt for adjustment of auxiliary handle* 3 "Drilling/Impact Drilling" selector switch 4 Handwheel "PowerControl" 5 Lock-on button for On/Off switch 6 On/Off switch 7 Rotational direction switch 8 Auxiliary handle* 9 Extraction device with dust collector and depth stop * 10 Telescopic guide with depth stop scale * 11 Set collar for depth stop* 12 Release button for dust collector * 13 Dust collector* 14 Dust protection ring* For lower voltage and models for specific countries, these values can vary. Typically the A-weighted noise levels of the product are: Sound pressure level 97 dB(A); Sound power level 108 dB(A). Vibration total values (triax vector sum) determined according to EN 60745: Drilling into metal: Vibration emission value ah =5. The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. the declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. Dusts from materials such as lead-containing coatings, some wood types, minerals and metal can be harmful to one's health. Touching or breathing-in the dusts can cause allergic reactions and/or lead to respiratory infections of the user or bystanders. Certain dusts, such as oak or beech dust, are considered as carcinogenic, especially in connection with wood-treatment additives (chromate, wood preservative). Use the dust/chip extraction only when working concrete, brick and brickwork. We declare under our sole responsibility that the product described under "Technical Data" is in conformity with the following standards or standardization documents: EN 60745 according to the provisions of the directives 2004/108/EC, 98/37/EC (until Dec. For this, as an example, pry off the holder of the filter element 17 ( ) and change the filter element 17 including the holder ( ). When placing on the holder again, make sure that the rubber gasket is inserted. Reattach the dust collector 13 again and lock it by pressing against the smooth surface of the release button 12. Removing the Extraction Device For removal of the extraction device 9, push the release button 16 to the right or left and pull off the extraction device 9 toward the front. To achieve optimum extraction results, please observe the following notes: ­ Pay attention that the extraction device faces flush against the workpiece or the wall. ­ When using the extraction device, always work with the maximum speed. [. . . ] In all correspondence and spare parts order, please always include the 10-digit article number given on the type plate of the machine. Only for EC countries: Do not dispose of power tools into household waste!According the European Guideline 2002/96/EC for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally correct manner. Nedan använt begrepp "Elverktyg" hänför sig till nätdrivna elverktyg (med nätsladd) och till batteridrivna elverktyg (sladdlösa). [. . . ]