User manual BOSCH PRIO LITHIUM-ION REV 8-2009

[. . . ] 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. [. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. penetration of water in the battery charger increases the risk of an electric shock. The battery charger is suitable only for charging Bosch lithium ion batteries within the listed voltage range. Have repairs performed only by a qualified technician and only using original spare parts. The machine is intended for dry sanding and polishing of wood, filler and coated surfaces. It is especially suitable for profiles, corners or hard to reach locations. Use the battery charger only when you fully understand and can perform all functions without limitation, or have received appropriate instructions. A complete overview of accessories can be found in our accessories program. Typically the A-weighted sound pressure level of the product is 76 dB(A). The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. the declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. Cordless Multi Sander Article number Rated voltage No-load speed No-load orbital stroke rate Sanding sheet surface Orbit diameter Weight according to EPTA-Procedure 01/2003 Battery Capacity Number of battery cells Battery Charger Charging time Article number min 33 ±3 2 607 225 085 (EU) 2 607 225 087 (UK) 2 607 225 147 (AUS) Ah V= min We declare under our sole responsibility that the product described under "Technical data" is in conformity with the following standards or standardization documents: EN 60745 (battery powered product) and EN 60335 (battery charger) according to the provisions of the directives 2006/95/EC, 2004/108/EC, 98/37/EC (until 28 Dec 2009), 2006/42/EC (from 29 Dec 2009). Please observe the article number on the type plate of your machine. Eckerhard Strötgen Head of Product Certification Do not continue to press the On/Off switch after the machine has been automatically switched off. The charging procedure begins as soon as the mains plug of the battery charger is plugged into a socket. During the charging procedure, the 3 LEDs light up one after the other and briefly go out. Disconnect the battery charger from the mains supply when not using it for longer periods. [. . . ] Only for EC countries: Do not dispose of power tools into household waste!According the European Guideline 2002/96/EC for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally correct manner. Do not dispose of battery packs/batteries into household waste, fire or water. battery packs/batteries should be collected , recycled or disposed of in an environmental-friendly manner. [. . . ]