User manual BOSCH PIF675T01E

[. . . ] EN Instruction manual 3 Table of contents Important information . Only after read ing these will you be able to operate the appliance correctly. If the appliance is passed to another per son, please enclose the instructions. Before switching on your appliance Transport damage Check your appliance after removing the packaging. If it has suffered any damage during transport, do not connect the appliance but contact the Technical Ser vices department. [. . . ] This function allows you to increase the maximum power level of the hotplate in use. Powerboost function limitations All the induction hotplates (1 and 4) have a temperature control. (See illustration) The Powerboost function will always be available whenthe other induction hotplate is not switched on. For example, if you want to activate this function in hotplate 1, number should be switched off, and vice versa. If the zone referred to is not switched off, the letter x and the power level j in the hotplate indicator will flash; it will return to the maximum power level setting (j). This is how to activate it Carry out the following steps: 1. When it is in this position press the + symbol for the zone concerned. You have activated the function. This is how to deactivate it Carry out the following steps: 1. In certain circumstances, the Powerboost func tion may be deactivated automatically to protect the internal electronic components of the hob. Timer function This function can be used in two different ways: - to switch a hotplate off automatically - as a cooking timer A hotplate is to switch off automatically Setting procedure You enter a specific cooking time for the desired hotplate. When the cooking time has elapsed, the hotplate switches off automatically. 1. Set the heat setting on the hotplate which is to be operated with the timer function. 2. If you select a different hotplate, touch the - and + symbols repeatedly and at the same time until the 1 indicator for the required hotplate flashes. 3. For +: 30 minutes For -: 10 minutes The 1 indicator for the hotplate flashes again. 4. Touch the - or + symbol until the desired cooking time appears in the timer indicator. If you have set a cooking time for several hotplates, it is always the shortest cooking time that is displayed. The 1 hotplate indicators light up. 21 When the cooking time has elapsed When the cooking time has ended, the hotplate switches off. Touch the - and + symbols repeatedly and at the same time until the required 1 indicator flashes. Touch the - and + symbols repeatedly and at the same time until the required 1 indicator flashes. If you would like to call up the remaining cooking time for a hotplate: Touch the - and + symbols repeatedly and at the same time until the 1 indicator for the relevant hotplate flashes. The timer function is no longer active after a power cut. Changing the cooking time Cancelling prematurely Notes Cooking timer You can use the timer on your cooker to set a time of up to 99 minutes. Touch the - and + symbols repeatedly and at the same time until the a indicator for the cooking timer flashes. Set the time using the - and + symbols. The time disappears after a few seconds. The shortest time set with the timer is displayed. 22 When the cooking time has elapsed A signal sounds when the cooking time has elapsed. Touch the - and + symbols repeatedly and at the same time until the a indicator for the cooking timer flashes. [. . . ] The cooking hob is too hot and has turned off. F4 F8 The cooking zone has been working at a high power and continuously for too long. If the indication continues, notify the technical assistance service. o2/o3 The cooking zone has overheated. The cooking hob is not well connected. U400 30 Normal operating noises for the appliance Induction heating technology is based on the vibration resistance of certain metals when subjected to high frequency waves. In some circumstances, these vibrations can cause a certain degree of noise, such as the following: This occurs when cooking at a high power. [. . . ]