User manual BOSCH PDA 180 E

[. . . ] 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. [. . . ] A workpiece clamped with clamping devices or in a vice is held more secure than by hand. Do not touch the damaged cable and pull the mains plug when the cable is damaged while working. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. English | 15 3 Extraction outlet 4 Sanding sheet* 5 Sanding plate 6 SDS button for release of the sanding plate 7 Vacuum hose* 8 Pad extender* 9 Sanding plate for extender* 10 Narrow pad extender* 11 Narrow rounded pad extender* The machine is intended for dry sanding and polishing of wood, plastic, metal, filler, as well as for painted surfaces. It is ist especially suitable for profiles, corners or hard to reach locations. Delta Sander Article number Rated power input Output power No-load speed No-load orbital stroke rate Sanding plate size (corner to corner) Orbit diameter Weight according to EPTA-Procedure 01/2003 Protection class W W rpm opm mm mm kg PDA 180 0 603 339 0. For lower voltage and models for specific countries, these values can vary. Typically the A-weighted noise levels of the product are: Sound pressure level 80 dB(A); Sound power level 91 dB(A). The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. the declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. 16 | English An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. Certain dusts, such as oak or beech dust, are considered as carcinogenic, especially in connection with wood-treatment additives (chromate, wood preservative). External Dust Extraction (see figure A) Attach a vacuum hose 7 onto the outlet piece 3. An overview for connecting to various vacuum cleaners can be found at the beginning of these operating instructions. When vacuuming dry dust that is especially detrimental to health or carcinogenic, use a special vacuum cleaner. We declare under our sole responsibility that the product described under "Technical Data" is in conformity with the following standards or standardization documents: EN 60745 according to the provisions of the directives 2004/108/EC, 98/37/EC (until Dec. When attaching a new sanding sheet, remove any dust or debris from the sanding plate 5 (e. To ensure optimum dust extraction, pay attention that the punched holes in the sanding sheet match with the holes in the sanding plate. [. . . ] 18 | English Switching On and Off To start the machine, push the On/Off switch 1 towards the front to "I". To switch off the machine, push the On/Off switch 1 towards the rear to "0". Preselecting the Orbital Stroke Rate With the thumbwheel for preselection of the orbital stroke rate 2, you can preselect the required orbital stroke rate, even during operation. The required stroke rate depends on the material and the working conditions and can be determined through practical testing. [. . . ]