User manual BOSCH KAD 62V40AU/03 SHORT INSTRUCTIONS

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BOSCH KAD 62V40AU/03. We hope that this BOSCH KAD 62V40AU/03 user guide will be useful to you.


BOSCH KAD 62V40AU/03 SHORT INSTRUCTIONS: Download the complete user guide (1104 Ko)

You may also download the following manuals related to this product:

   BOSCH KAD 62V40AU/03 SUPPLEMENT (887 ko)
   BOSCH KAD 62V40AU/03 SUPPLEMENT (887 ko)
   BOSCH KAD 62V40AU/03 INSTALLATION INSTRUCTIONS (1245 ko)

Manual abstract: user guide BOSCH KAD 62V40AU/03SHORT INSTRUCTIONS

Detailed instructions for use are in the User's Guide.

[. . . ] All other charges, including transportation charges for replacements under this warranty and labor costs not specifically covered by this warranty, shall be borne by you. This warranty is extended only to the original purchaser of the U-Line product. The Registration Card included with the product should be promptly completed by you and mailed back to U-Line. The following are excluded from this limited warranty: installation charges; damages caused by disasters or acts of God, such as fire, floods, wind and lightening; damages incurred or resulting from shipping, improper installation, unauthorized modification, or misuse/abuse of the product; customer education calls; food loss/spoilage; door and water level adjustments (except during the first 90 days from the date of purchase); defrosting the product; adjusting the controls; door reversal; or cleaning the condenser. [. . . ] · It must have a check valve in the discharge line to prevent waste water return to the pump. · It must have an overflow protection control which will shut off power to the ice maker in the event of a pump failure. · It must have an operating temperature range of 50°F to 110°F (10°C to 40°C). !CAUTION In the event of a power outage, restricted drain or pump failure, the failure to use the U-Line P60 drain pump or a pump with the above listed specifications, could result in substantial water leakage and pooling with severe and costly water damage and related consequential damages and harm. 8 SITE PREPARATION 1. Wipe out inside of unit with a damp cloth. 10 CONNECTING THE WATER SUPPLY When connecting the water supply, follow these guidelines: · Review the local plumbing codes before you install the unit. · In most instances, the cold water supply will come from the basement through a hole in the floor. · Connect sufficient tubing to the unit to allow the unit to be moved for cleaning and servicing. However, make certain that the tubing is not pinched or damaged during installation. The water line is inserted through the hole in the rear of the unit, through a clip on the sidewall to connect to the solenoid valve in the front (see Figure 5). 2. PANEL SCREWS C L N O F F I C E SCREW SCREW GRILLE UL203A C L N O F F I C E UL401 Figure 4 Figure 5 11 User's Manual 4. Slide the compression fitting and ferrule over the 1/4 inch water supply line. Using two wrenches, tighten the compression fitting on the supply line (see Figure 6). WATER LINE C L N O F F I C E UL402 Figure 8 6. Install plastic screw plugs removed in Step 2 in old hinge holes (3 each, top and bottom). UL312A 8. 9. Figure 18 16 CUSTOM DOOR PANELS Two types of custom door panels can be installed on your U-Line unit to harmonize with or accent the surrounding decor. FULL OVERLAY DOOR PANEL A full overlay door panel completely covers the door frame and handle to give a built-in appearance. See your U-Line dealer for the optional Full Overlay Door Panel Kit which contains the Panel Preparation Document for building and installing a full overlay panel. See Table 1 and Figure 19 for full overlay door panel dimensions. Table 1. Full Overlay Panel Dimensions Model CLR2060 A 29-7/8" B 14-3/4" B CUSTOM INSERT DOOR PANEL A custom door panel can be inserted into the door frame to better match the surrounding decor. Custom door panels can be flat or raised, as long as the maximum panel thickness where inserted into the door reveal (channel) is 1/4" thick. For raised A panels, the depth of the reveal is 1/4" on all four sides. See Table 2 and Figure 19 for custom door panel insert dimensions. Table 2. Custom Insert Door Panel Dimensions Model 2015 Series 2075 Series A 28-5/32" 28-5/32" B 14-1/32" 23-1/32" Figure 19 The door panel insert must not weigh more than 20 lbs. 17 User's Manual Install the insert as follows: !Start in the middle and pull outward, moving toward the edge (see Figure 22). Holding door gasket out of the way, replace handle on door making sure it is seated properly on insert and that screw holes line up. Starting at the corners and working inward, push door gasket into place on door. [. . . ] It is a violation of Federal law to use this solution in a manner inconsistent with its labeling. Use of any other cleaner can ruin the finish of the evaporator and will void the warranty. Read and understand all labels printed on the package before use. 24 Ice machine cleaner is used to remove lime scale and other mineral deposits. Set the cycle selector switch to OFF and allow the ice to melt off of the evaporator. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BOSCH KAD 62V40AU/03




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BOSCH KAD 62V40AU/03 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.