User manual BOSCH GSR 12 V

[. . . ] 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. [. . . ] High reaction torque can briefly occur while driving in and loosening screws. A workpiece clamped with clamping devices or in a vice is held more secure than by hand. Take protective measures when dust can develop during working that is harmful to one's health, combustible or explosive. Always wait until the machine has come to a complete stop before placing it down. The tool insert can jam and lead to loss of control over the power tool. ) as well as during transport and storage, set the rotational direction switch to the centre position. Ensure the On/Off switch is in the off position before inserting battery pack. Carrying the power tool with your finger on the On/Off switch or inserting the battery pack into power tools that have the switch on invites accidents. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. While reading the operating instructions, unfold the graphics page for the machine and leave it open. Soft grip Screwdriver bit* Battery unlocking button Battery* Rotational direction switch On/Off switch Universal bit holder* Securing screw for keyless chuck Allen Key** We declare under our sole responsibility that this product is in conformity with the following standards or standardization documents: EN 60745 according to the provisions of the directives 89/336/EEC, 98/37/EC. The machine is intended for driving in and loosening screws as well as for drilling in wood, metal, ceramic and plastic. Cordless Screwdriver Article number Rated voltage No-load speed ­ 1st gear ­ 2nd gear Max. Typically the A-weighted sound pressure level of the machine is lower than des 70 dB(A). Overall vibrational value (vector sum of three directions) determined according to EN 60745: Drilling in metal: Vibrational emission value ah =<2. ) as well as during transport and storage, set the rotational direction switch to the centre position. This makes quick, convenient and easy changing of the tool in the drill chuck possible. Firmly tighten the collar of the keyless chuck 1 by hand in clockwise direction until the locking action ("click") is no longer heard. The locking is released again to remove the tool when the collar is turned in the opposite direction. WARNING The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. [. . . ] In all correspondence and spare parts order, please always include the 10-digit article number given on the type plate of the machine. Only for EC countries: Do not dispose of power tools into household waste!According the European Guideline 2002/96/EC for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally correct manner. Exploded views and information on spare parts can be found under: www. [. . . ]