User manual BOSCH 608

[. . . ] Product Division Terminals User Manual GB GSM-Com 608 PRECAUTIONS For your safety Please pay special attention to the following simple guidelines. Breaking the rules may be dangerous or illegal. Medical electronics Mobile telephones may interfere with the functionality of inadequately protected medical devices. Consult your physician or the manufacturer of the medical device if in doubt. Always switch off your mobile phone before visiting a hospital and observe the local regulations and rules. In-car safety Do not use your mobile phone when driving a vehicle except from in emergency cases. [. . . ] The display will show the Broadcast ID number and you can thus identify the kind of message received. A read message will be marked by . 21 SETUP MENU SYSTEM The setup menu system offers you the possibility of setting the individual sub menus and options according to your own personal wishes. Phone book setup (Menu 5) 51 Fixed dialling on/off 52 Phone book sorting 53 Delete all entries stored in the lists (Outgoing, Answered, Missed) Network services (Menu 1) 11 12 13 14 Call divert Call barring Call waiting Closed user group Call timers and charge (Menu 6) 61 62 63 64 View duration and cost of last call View duration and cost of total calls Reset call timers Display call timer and cost during conversation 65 Call charge Tones setup (Menu 2) 21 22 23 24 25 26 Ring tone Trembler (optional extra) Message tone Broadcast tone Key tone Factory settings Security (Menu 7) 71 PIN code 72 SIM card lock 73 Change network password Phone setup (Menu 3) 31 32 33 34 35 36 37 38 39 Selection of language Automatic redial Selection of network Power saving function Car kit options Edit welcome greeting Speed dialling Any key answer Factory settings Calculator (Menu 8) Message setup (Menu 4) 41 Setup for sending Point-to-point messages 42 Setup for receiving Cell broadcast messages 43 Delete messages 22 SETUP MENU SYSTEM How to access the Setup menu system 1. Confirm by pressing SELECT Back to standby mode While you are in menu mode, holding EXIT will always bring you to the standby mode. The telephone automatically returns to standby mode when no key has been pressed for 60 seconds. Menu numbers On the right hand side in the first line of the display you will always see the number of the menu and sub menu in which you are operating. Example: 62 6 = Menu 6: Call timers and charge 2 = Sub menu 2: View total calls A before the sub menu/option number indicates the option you have selected. Shortcut to the setup menu system As you get more familiar with the Setup menu system, you will probably find it easier to access some of the menus simply by pressing the menu code number. Press 62 23 CALL DIVERT You have the option of diverting all calls or choosing to divert incoming calls only if unanswered. The unanswered calls option diverts calls ­ if you are busy ­ if you do not reply ­ if there is no contact Registration To enable a call divert you must register it first. You will be asked to specify whether you want the call divert function to apply to all services, speech, data services, fax services or message services (SMS). Deactivation/activation If your network does not support Phase 2 features, you will not be able to make use of the deactivate and activate options. Calls can be diverted to a telephone number stored in your phone book or to any other number. Access your phone book by pressing or enter a phone number via the keypad. If you have chosen to have all calls diverted, the call divert indicator will be visible on the standby display. If you wish to suspend your calls being diverted for a time, select Deactivate. All registrations will remain in the network, so next time you wish to divert your calls to the same number, simply select Activate. Validity time If you have selected Divert if unanswered or Divert if no reply you can specify that a period of time must elapse before the call is diverted. It is always possible to see the status of the activated call diversions by selecting Status. Registered call diversions can be cancelled individually or can all be cancelled at once by selecting Cancel all. 24 CALL DIVERT How to activate call divert for all calls 1. Confirm by pressing SELECT once more to indicate that you want access to the call divert menu. Select using Divert all calls Register ­ All services ­ Speech ­ Data services ­ Fax services ­ Message services ­ Number Activate Deactivate Status Cancel Status Cancel all (call diverts) 5. Confirm your choice by pressing OK If you want to activate a call divert on the basis of Divert Divert Divert Divert if if if if unanswered busy no reply no contact just follow the procedure described above giving you the same options. 25 CALL BARRING You can set up call barring for different types of outgoing and incoming calls to restrict the use of your phone. You are asked to specify whether you want the call barring to apply for all services, speech, data services, fax services or message services (SMS). When setting up or cancelling any call barring, you will be asked to enter your 4-digit password provided by your network operator. [. . . ] The display and keypad backlighting on your phone will switch on and off automatically with the car ignition. While the phone is switched on and placed in the cradle the backlighting will remain on continuously. A telephone with an extended battery cannot be used in the hands-free car installation kit. How to make a hands-free call 1. Enter the phone number you wish to call or retrieve it from the phone book. [. . . ]