User manual BIONAIRE BW2100

[. . . ] Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. Do NOT attempt to repair or adjust any electrical or mechanical functions on this product. This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. [. . . ] doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431. BW2100/2100R07EM1 Printed in China Instruction Leaflet INFO-LINE If after having read this leaflet, you have any questions or comments on your fan, call 1-800-253-2764 in North America. 9100010009527 BW2100_2100R07EM1. qxd 11/19/07 4:51 PM Page 2 FAN SAFETY PLEASE READ AND SAVE THESE IMPORTANT SAFEGUARDS IMPORTANT INSTRUCTIONS When using electrical appliances, basic safety precautions should always be taken including the following: 1. To protect against electrical shock do not immerse unit, plug or cord in water or spray with liquids. Close supervision is necessary when any appliance is used by or near children. Unplug from outlet when not in use, when moving fan from one location to another, before putting on or taking off parts and before cleaning. To avoid fire hazard, NEVER place the cord under rugs or any parts near an open flame, cooking or other heating appliance. DO NOT operate any appliance with a damaged cord or plug after the appliance malfunctions, or has been dropped/damaged in any manner. 10. The use of attachments not recommended or sold by the appliance manufacturer may cause hazards. 12. DO NOT let the cord hang over the edge of a table, counter or come in contact with hot surfaces or leave exposed to high traffic areas. 15. DO NOT operate fan until fully assembled with all parts properly in place. 16. This product is intended for household use only and not for commercial or industrial applications. PLEASE SAVE THESE INSTRUCTIONS CONSUMER SAFETY INFORMATION THIS APPLIANCE HAS A POLARIZED AC PLUG (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If it still does not fit, contact a qualified electrician to install the proper outlet. DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY FEATURE IN ANY WAY. INSTALLATION INSTRUCTIONS Carefully unpack contents from carton. FIGURE 2 FRONT VIEW RIGHT Built-in Extender, pull out up to 7 inches (17cm) LEFT Extra Extender Panels 4. 25 inches (10cm) 2 pieces included in your box UNIT'S LENGTH SETTING AUTO MODE 1. Press the Mode button to scroll to the desired auto speed setting (A3, A2, or A1). Choose the desired temperature setting by pressing the Temp Up (+) or Temp Down (-) buttons. Once the desired temperature is set, the digital display will return to show the ambient room temperature. View the set temperature by pressing either the Temp Up (+) or Temp Down (-) buttons. [. . . ] Note that the fan blades work independently from one another and can be used for air intake (bring fresh air in from outside), exhaust (push air out from within the room) or exchange (cycles air in and out of the room simultaneously). AUTO MODE Your fan is equipped with a Programmable Digital Thermostat that will automatically turn the fan ON and OFF depending upon the preset comfort temperature. This is ideal for night time operation when temperatures can drop below comfort levels. For example, if you set your fan to 75 degrees and the temperature drops to 74 degrees then the fan will automatically turn off. [. . . ]