User manual BIONAIRE BFH004X-01

[. . . ] When using the heater in portable condition, do not place in the immediate surroundings of a shower or swimming pool. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. BATHROOM USE UK ONLY: • Regulations prevent the use of this heater in the bathroom. [. . . ] In Auto mode, when the heater automatically switches off, the High or Low indicator (depending on the setting) will flash. AccuTemp™ will memorise the settings if the heater is turned off using the "MODE" button (see 6 above). However, if the heater is unplugged, the AccuTemp settings will need to be reprogrammed as detailed from1 above. USING THE TIMER AccuTempTM Programmable Timer (For BFH410 only) Accutemp™ allows the user to programme the heater to come ON at a preset time OR switch OFF after a selected period. You require the heater to switch on at 5 pm therefore: Set the ON time at 4 hours. If the heater is on, press the mode button for 2 seconds to switch the heater off. While the heater is off, hold down both the (+) and (-) buttons together to select timer. The display will flash and a red dot will flash on the right hand side of the digital display. Using either the (+) or (-) buttons, programme the heater to switch on up to 16 hours later, in increments of 1 hour. After the preset length of time the heater will automatically turn on to “Auto-Hi-24˚C” for a period of 2 hours. The heater is running and you require the heater to switch off at 10 pm therefore: Set the time at 9 hours. While the heater is running hold down both the (+) and (-) buttons together to select timer. The display will flah and red dot will flash on the right hand sode of the digital display. Using either the (+) or (-) buttons programme the heater to turn off up to 16 hours later in increments of 1 hour. After setting the time, the digital display will return to showing the current room temperature and will illuminate to show the timer is activated. After the predetermined length of time has passed, the heater will automatically switch off. When the timer is set, a red dot will flash continuously in the right hand side of the digital display. If the Mode button is pressed when the timer is actived, the timer function will be cancelled. To reactivate the timer, it will need to be reprogrammed as detailed above. It is not possible to set the on and off timers as part of the same programme. uSING THE TIMER (FOR BFH400 ONLY) Your heater has been equipped with a timer. When the timer is used, the heater will switch itself off after a preset time (max. [. . . ] € In the unlikely event of breakdown from a manufacturing related fault, please return it to the place of purchase, with your till receipt and a copy of this guarantee. € The rights and benefits under this guarantee are additional to your statutory rights which are not affected by this guarantee. € Holmes Products Europe undertakes within the specifiied period, to repair or replace free of charge, any part of the appliance found to be defective from a manufacturing fault provided that: • We are promptly informed of the defect. € The appliance has not been altered in any way or subjected to misuse or repair by a person other than a person authorised by Holmes Products Europe. [. . . ]