User manual BIONAIRE BCH4267

[. . . ] undertakes within the specific period, to repair or replace free of charge, any part of the appliance found to be defective provided that: · We are promptly informed of the defect. · The appliance has not been altered in any way or subjected to misuse or repair by a person other than a person authorised by Holmes Products (Europe) Ltd. · No rights are given under this guarantee to a person acquiring the appliance second hand or for commercial or communal uses. · Any repaired or replaced appliance will be guaranteed on these terms for the remaining portion of the guarantee. [. . . ] To prevent the unit from cycling, you need to change the thermostat setting. FROST-GUARD SETTING This special setting will automatically turn on the heater if the room's temperature reaches freezing. To set, turn the Thermostat Control all the way to LO ( ), and turn the Selector Control to either HI (II) or LO (I). COLOUR CHANGING DISPLAY Your heater features the revolutionary technology and safety of Colour Changing Display. As your heater warms up, parts of, the front grill will change colour ­ a visual reminder that the grill is warm and the heater is on. When the heater is turned off, the grill will return to its original colour , thus indicating the grill is cool to the touch. This may take up to an hour depending on the environment surrounding the heater and the cooling down time of the element. NOTE: If left in extreme cold temperatures (-22° F/-30°C) the Colour Changing Display may not perform. NOTE: The colour changing effect may wear off after continuous, heavy use of the heater or in time. AUTO SAFETY SHUT-OFF This heater is equipped with a technologicallyadvanced, safety system that requires the user to reset the heater if there is a potential overheat situation. When a potential overheat temperature is reached, the system will automatically shut the heater off. Safety Back-Up Fuse In the unlikely case the heater does not respond to an overheat situation, the safety back-up fuse will engage. Please contact your local service number on the back of the manual for advice. PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS When using electrical appliances, basic safety precautions should always be taken including the following: 1. Before connecting the heater, check that the voltage indicated on the rating plate corresponds to the main voltage in your home/office. Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool. If the supply cord or plug is damaged, it must be replaced by the manufacturer or its service agent or similarly qualified person in order to avoid hazard. Should the product suffer damage or breakdown, it must be returned to the manufacturer or their service agent. Under the environment with electrical fast transient, the product may malfunction and require user to reset the product. [. . . ] If this plug is unsuitable or needs to be replaced, please note the following: The wires in the mains lead are coloured as such: BROWN LIVE BLUE NEUTRAL Please note that the colour of these mains wires may not correspond with the colour markings that identify the terminals in your plug. Please proceed as follows: The BROWN coloured wire must be connected to the terminal, which is marked with the letter "L" or is coloured RED. The BLUE coloured wire must be connected to the terminal, which is marked with the letter "N" or is coloured BLACK. DO NOT CONNECT either of these wires to the earth terminal in the plug. [. . . ]