User manual BIONAIRE BAP242S

[. . . ] GUARANTEE PLEASE KEEP YOUR RECEIPT AS THIS WILL BE REQUIRED FOR ANY CLAIMS UNDER THIS GUARANTEE. · In the unlikely event of breakdown from a manufacturing related fault, please return it to the place of purchase, with your till receipt and a copy of this guarantee. · The rights and benefits under this guarantee are additional to your statutory rights which are not affected by this guarantee. · Holmes Products (Europe) Ltd undertakes within the specifiied period, to repair or replace free of charge, any part of the appliance found to be defective from a manufacturing fault provided that: · We are promptly informed of the defect. [. . . ] · The air purifier contains no user serviceable parts and should the product suffer damage or breakdown it must be returned to the manufacturer or its service agent. · Should the air purifier stop working, first check the fuse in the plug (UK only) or fuse/circuit breaker at the distribution board is operating, before contacting the manufacturer or service agent. · This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. HOW THE AIR PURIFIER WORKS Dirty, dust laden air is drawn through the front of the air purifier and through the multi-stage filtration system. The baking soda filter will help clear odours making the air cleaner and fresher. The HEPA filter entraps 99% of all smaller visible and non-visible particles down to 2 microns in size. PRODUCT FEATURES Quiet operation Your air purifier has been designed to be unobtrusive around the home and to be very quiet. The motor provides quiet performance and durability necessary for continuous use. Dual position The unit can be placed either upright or on its side, flush against the wall. When positioning the unit be sure that the air inlet grill, filters and air outlet grill are not blocked, to ensure maximum air flow. Ioniser Your Bionaire® Air Purifier has an independently controlled ioniser, which when turned on, releases negative ions into the outgoing filtered air. Ions are tiny particles that carry either a positive or negative charge. These ions exist naturally all around us in the air, water and ground. Both positive and negative ions are colourless, odourless and completely harmless. Negative ions help the air purification process by attaching themselves to very small airborne particles in the room. These particles take on a negative charge and may join with positively charged particles, such as dust, pollen, smoke and pet dander to form larger particles that are then more readily captured by the filter system, or they may be attracted to positively charged surfaces like walls or floors. You may also note, after extended use, that dust may have collected around the grills or front panel. This is from the ionisation effect caused by the negative ions exiting from the air outlet. This dust does not come from the air output, but is drawn out of the uncleaned air going past the air outlet. This is additional evidence of the air cleaning effectiveness of negative ions. The dust can be easily removed with a clean, dampened cloth or soft brush. PLEASE NOTE: it is important to change the HEPA filter at recommended intervals. Using the ioniser in conjunction with dirty filters may result in dirty particles exiting the air purifier and being attracted to walls, carpets, furniture and other household objects, These dirty particles may prove very difficult to remove. [. . . ] DO NOT try to wash and re-use the HEPA filter Replace with a new HEPA filter HAPF30 removing the protective plastic bag before inserting into the air purifier. Align the clips on the top of your HEPA filter with the rails on the inside of the unit. Align the clip on the top of your HEPA filter with the rails on the inside of the unit. NOTE: The pleated material and rubber gasket should be facing towards the unit when applied. [. . . ]