User manual BEITER RE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BEITER RE. We hope that this BEITER RE user guide will be useful to you.


BEITER RE : Download the complete user guide (153 Ko)

Manual abstract: user guide BEITER RE

Detailed instructions for use are in the User's Guide.

[. . . ] Update 01/2004 The Attaching the Support on the Bow window: REST HOW TO INSTALL Clean the surface of the bow window. Insert a bow-square on the string and the Beiter Rest Tool in the Beiter Rest to easily find the correct position, as much as possible parallel to the bow square (pic. [. . . ] A smaller angle when installing the Support will allow even a more precise height adjustement, but changes also the stiffness of the Arrow Rest Finger. With the angle of 15°, one complete turn of the Beiter Rest Tools moves the Arrow Rest by 0, 39mm up or down. Moving the Arrow Rest by one line (1mm) with the 15° angle, effects a height adjustement of 0, 26mm. +49 7720 856860 Fax +49 7720 4238 email: info@wernerbeiter. com Update 01/2004 The PLEASE NOTE: REST HOW TO USE The Beiter Rest can not have unlocked screws!The only moving part is the Spindle: without the inserted Rest Tool, the spindle can no longer move!The finger may - especially at the beginning - wear: this may be compensated with the height adjustement. If the wear is too extreme, the Finger can be exchanged easily, precisely and quickly. A too high or too low nocking point, or a not precise tuning causing clearance problems), the Finger may wear faster, than with a correct set-up. CHANGING THE FINGER: You may easily change from Aluminum to Carbon and back, finding always again exact the same position: simply change from the finger "12" to "23" and vice-versa. Another reason o change the Finger, may be the fact that the Finger brakes or wears due to an incorrect tune. A small groove may be compensated with the height adjustement. pic. 11 IMPORTANT! Every Finger is produced out of a single mould, so each Finger is identical to the other!To exchange the Finger, insert the Beiter Rest Tool completely into the Spindle (for LH without the sleeve, if there is not enough space), and turn clockwise (to the right pic. [. . . ] 18 DE-78083 Dauchingen Description Rest, Finger 15-12-0, 65 Rest, Finger 16-17-0, 65 Rest, Finger 17-23-0, 77 Rest, Finger 15-12-0, 65, 10 pcs. +49 7720 856860 Fax +49 7720 4238 email: info@wernerbeiter. com www. WernerBeiter. com [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BEITER RE




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BEITER RE will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.