User manual BEITER NO

[. . . ] Update 05/2004 The HINTS AND GENERAL INFORMATION: NOCK The Beiter Nock is asymmetric, to adapt perfectly to the asymmetric drawn string. [. . . ] Clean the cut surface of aluminum and aluminum-carbon shafts, before inserting the nock. If the shaft diameter is a few hundreds of millimeter too big and the nock fits too loose, don't glue it!(look at the left drawing on the bottom) To install, remove or turn a Beiter Nock, use the Beiter Push'n'Pull: it gives a better grip and works as a small lever. HINTS AND GENERAL INFORMATION: Many arrow shafts are coming with an installed Super Uni Bushing. Not only do you achieve the highest possible precision, but you also have much less weight on the end of the shaft, compared to the use with a Super Uni Bushing and the relative nock. Here is a real example: A 19/2 Hunter Nock with Uni Bushing (2314) weights 1, 45g/22, 36grns. And: the combination of Uni Bushing System and Nock is more expensive than 1 Beiter Nock! Info! [. . . ] The Beiter Nock gives the best available guidance on the string! The release of Compound archers without a D-Loop is asymmetric too! Werner Beiter Daimlerstr. [. . . ]