User manual BEGLEC ANTARI HAZER

[. . . ] Prior to use, we suggest that you carefully read all of the instructions. By following the suggestions found in this user manual, you can look forward to the reliable and satisfactory performance of your ANTARI Hazer for years to come. [. . . ] Unpacking & Inspection Open the shipping carton and verify that all equipment necessary to operate the system has arrived intact. Before beginning initial setup of your ANTARI Hazer, make sure that there is no evident damage caused by transportation. In the event that the unit's housing or cable is damaged, do not plug it in and do not attempt to use it until after contacting your ANTARI dealer for assistance. Pour hazer liquid into the liquid tank, being careful not to exceed the maximum fluid level. Use only ANTARI Hazer Liquid or other dealer-recommended high-quality hazer fluid . When liquid level reaches the fill line, place cap back on liquid tank. If you will be controlling your unit remotely, firmly attach the remote control cable to the proper input. For further information on operating your ANTARI Hazer, see the section titled, "Remote Control Operation". If your model includes a mounting bracket designed for overhead installation, it may be installed at floor level or suspended overhead. If the unit is to be mounted using the bracket, avoid suspending the unit such that haze is emitted directly toward any one's face. Whatever installation method you choose, do not allow the unit to have more than a 15 degree angle of inclination. If you experience low output, mechanical noise or no output at all, unplug immediately. Check fluid level, the external fuse, remote connection, and power from the wall. Does not function after 30 seconds, discontinue operation or permanent damage to the unit may result. [. . . ] ANTARI Hazer Liquid comes in two varieties: ANTARI HZL-1 is a high-performance low-residue oil-based hazer liquid that has been designed specifically for HZ-100 and HZ-400. Before switching the kind of hazer liquid in use, completely drain the hazer's tank to avoid mixing. [. . . ]