User manual BARNETT CROSSBOWS REVOLUTION CRANK COCKING DEVICE

[. . . ] Barnett International Limited Warranty The crank cocking device is guaranteed to the original purchaser to be free of manufacturing defects for a period of one year from the date of purchase. Our liability extends to parts, labor and return transportation to the consumer. [. . . ] The latch mechanism should always be engaged when cocking the crossbow. An audible clicking sound should be present while turning the handle in a forward rotation. If this clicking sound is not present, place safety in engaged position. Un-cocking the Crossbow- do not un-cock the crossbow with the Crank Cocking Device. The best way to un-cock your crossbow with a crank-cocking device attached is to shoot an arrow into the ground. You may want to Warranty registration card (attached) must be mailed within 10 days of purchase to validate the warranty. WARRANTY CARD CCD Name______________________________ Age______ Address______________________________________ City____________________ State______ Zip_______ Date of Purchase__________ Phone # _____________ Place of Purchase__________________ Price Paid____ Purchase Address______________________________ City____________________ State _____ Zip _______ Registration completed by: Dealer ( ) Consumer ( ) Sales Representatives Name: Registration _________________________________ 1. With stock extender removed make sure there are (5) five holes on the butt of crossbow. 3. Line up the (5) five holes of the CCD butt plate bracket with the 5 holes on the butt of the crossbow. Install the 2 #6 Philips head screws through the butt plate and into the gunstock. 4. Put the stock extender back into the crossbow making sure the stock extender moves in and out freely. 5. Slide stock extender back into crossbow making sure stock extender moves freely, if not repeat step 4. Fig 1 Fig 2 6. [. . . ] Remove hooks and wind rope onto spool. Fig 3 Fig 4 STEP B If you only have 3-predrilled holes in the stock; line up the butt plate with the existing holes in stock. Using pencil trace the two extension holes, drill holes using . 125 drills to a depth of 1/8" to 1/4 ", continue installation with step 3. Fig 5 Fig 5A [. . . ]