User manual AVITAL POINT 3

[. . . ] Point3 Immobilizer Owners Manual Your Point3 Immobilizer includes two coded keys. [. . . ] Valet Switch The valet switch is a small, hidden toggle switch that allows you to place your Immobilizer into Valet Mode to prevent automatic arming and immobilization of the engine. You should put the Immobilizer into Valet Mode when your car is being serviced by mechanics, car wash personnel or driven by valet attendants. In the event of a lost or stolen coded key, you can also use the Valet Mode to override the system to allow you to start the engine. While in Valet Mode, the engine immobilization circuits will be bypassed. NOTE: Be sure to ask your dealer to show you where the valet switch is located. 3 1 To Activate Valet Mode. Turn the ignition key "OFF. " The LED will turn on solid red to indicate the system is in Valet Mode. Turn the ignition key "OFF. " The LED will turn off and then begin to flash in a slow, steady pulse to indicate the system is arming. Optional Horn Honk Output While the system is activated (armed), if someone attempts to start the engine without deactivating the Immobilizer first, the vehicle horn will pulse on and off to attract attention to the vehicle. (This feature may require additional parts and labor. ) Adding/Deleting Coded Keys 1. [. . . ] This will automatically erase the missing coded key from memory. © 1999 Avital Technologies, Inc. Part Number: 31-3310 2 [. . . ]