User manual ART PHANTOM II PRO

[. . . ] PHANTOMIIPro Two Channel 48 Volt Phantom Power Supply ARTcessories The PHANTOMIIPro is designed to do one thing and do it well. [. . . ] Since a balanced system minimizes induced noise, it is the preferred method of connecting audio gear, especially when long lengths of cable are used. The PHANTOMIIPro is an invaluable tool in application areas including (but not limited to!): home or professional recording studios, live sound, PA, permanent installs, DJ, AV, podcasting and broadcasting. Use it with mixers, audio processors, digital audio workstations or anywhere you need phantom power for your mics. FEATURES: XLR connectors for balanced inputs and outputs Low power, high efficiency CMOS circuitry for long battery life using a standard 9-Volt battery (Alkaline recommended) Can be powered with an external power supply for operation from AC mains Rugged extruded aluminum case with easily accesible battery compartment LED lighted On/Off switch Low noise, low distortion circuitry SPECIFICATIONS: Input Connections Output Connections Phantom Power Voltage Current Limiting Resistors Power Source Female XLR (2) Male XLR (2) 48 Volts DC typical 6. 98k Ohms (1%) 9V battery (IEC-6LR61, ANSI-1604A type Alkaline recommended) or external supply 7. 5-12 V AC/DC, < 150 mA 10 mA - no load 45 mA - typical (full load - 2 microphones) > 10 hours with Alkaline battery ­ typical (full load) 1. 85 H x 4. 6 W x 3. 9 D (in) 47 H x 117 W x 99 D (mm) 0. 82 lbs / 0. 37 kg Current Drain Battery Life Dimensions Weight INSTALLATION and OPERATION: 1) Install a battery in the unit by unscrewing the knurled fastener to open the 9V BATTERY compartment and snapping the connector on to the battery. Alternatively, connect an external power supply to the EXTERNAL POWER jack. The PHANTOMIIPro is protected in case both sources of power are applied at the same time. Connect the cable from your microphone to the MICROPHONE INPUT 1 or 2 female XLR connector on the front panel. [. . . ] If connecting the PHANTOMIIPro to another piece of equipment with its own phantom power, be sure to turn off the phantom power on that piece of equipment. 2) 3) 4) 5) 6) [. . . ]