User manual ART MX622

[. . . ] ART ­ MX622 Six Channel Stereo Mixer with EQ and Effects Loop OPERATION MANUAL INTRODUCTION The MX622 is a versatile mixer combining three balanced microphone or line level inputs with three stereo line inputs into a single stereo line level mix. Each mono balanced XLR input includes fully variable Input gain, Mic/Line switch, Clip indicator, and selectable 15 Volt Phantom power. An external effects loop section provides a mono Send from the three Mic/Line channels to external equipment and stereo Returns with Effects Level and In/Out switch. [. . . ] Once the MX622 is connected to the main mixer, tape deck, computer interface, or power amplifier, apply a test signal, set the Efx Loop In/Out switch on the front panel to the IN position, and adjust the Efx Level control for the desired effects intensity. g) The Left and Right Efx Loop Return jacks may alternately be used as a stereo line input with its own level control and In/Out switch. h) Connect either the ¼" balanced Left and Right Main Output jacks or the RCA Record Out jacks to the input of the mixer, tape deck, computer, or power amplifier with the appropriate balanced or unbalanced, shielded cables. i) Switch on the power and set the Master Level to the ½ way setting, then adjust the input channel Level controls as required for the best mix and level while checking the Mic/Line channel CLIP LEDs for activity. Turn down any channel with CLIP activity until the LED is on during extreme peaks only. k) Re-adjust the Master Level as required for best signal level. WARNINGS All operating instructions should be read before using this equipment. To prevent the risk of electrical shock, do not remove the cover or the back. Do not expose this unit to rain or moisture or to heat sources such as radiators, stoves, or other items that generate excessive heat. When moving this equipment, it should be placed in its original carton and packing, to reduce the risk of damage in transit. WARRANTY INFORMATION Limited Warranty Applied Research and Technology will provide warranty and service for this unit in accordance with the following warrants: Applied Research and Technology, (ART) warrants to the original purchaser that this product and the components thereof will be free from defects in workmanship and materials for a period of three years from the date of purchase. Applied Research and Technology will, without charge, repair or replace, at its option, defective product or component parts upon prepaid delivery to the factory service department or authorized service center, accompanied by proof of purchase date in the form of a valid sales receipt. Exclusions: This warranty does not apply in the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs. This warranty is void if the serial number is altered, defaced, or removed. ART reserves the right to make changes in design or make additions to or improvements upon this product without any obligation to install the same on products previously manufactured. ART shall not be liable for any consequential damages, including without limitation damages resulting from loss of use. [. . . ] 3) If you are returning the unit for service, pack the unit in its original carton or a reasonable substitute. The original packaging may not be suitable as a shipping carton, so consider putting the packaged unit in another box for shipping. 4) Include, with your unit, a note with the RA number and your contact information including a daytime phone number, preferably attached to the top of the unit. Copyright 2009 Applied Research & Technology www. artproaudio. com MX622 [. . . ]