User manual ARGUS DC-1730

[. . . ] If the camera is idle for a long period of time, please remove the batteries to avoid battery leakage and corrosion. To avoid explosion and hazard to environment, please don't put the battery into fire. To avoid photo loss, please download photos to your computer as soon -2- as possible. [. . . ] After camera is activated, press Mode and LCD will display " ". Hold down Shutter within 3 seconds and it will take 3 photos continuously. If it is not operated within 3 seconds, LCD will return to Preview status from Menu options. Prompt: Poor light in continuous shooting may cause incorrect exposure, affect photo quality or result in failure in photo taking (in case of failure, your camera will give off two "beeps"). Deleting Last Photo After camera is activated, press Mode four times and LCD will display " ". If it is not operated within 3 seconds, LCD will return to Preview status from Menu options. Deleting All After camera is activated, press Mode three times and LCD will display " ". If it is not operated within 3 seconds, LCD will return to Preview status from Menu options. Hi/Lo Shift After camera is activated, press Mode Function 5 times and LCD will display " ". This mode shift between Hi ( ) and Lo ( ). LCD will return to Preview status from Menu options if it is not operated within 3 seconds, To resume " " status, just press Mode 5 times again and LCD will display " ". Image Compression/Processing Mode Shift: After camera is activated, press Mode 6 times and CSTN will display " " -9- (Ld). Press Shutter within 3 seconds to shift between Compression ( Hd) and ordinary mode (Ld) (image is shifted to compression/processing mode (Hd) from ordinary mode (Ld) to expand photo capacity from SXGA 24 photos or VGA 93 photos to SXGA 49 photos or VGA 187 photos. If it is not operated within 3 seconds, LCD will return to Preview status from Menu options. Note: The below is a detailed description of the relation between shift in image compression/processing mode and the shift between Hi/Lo: Ld Hd Hi SXGA (24 photos) SXGA (49 photos) Lo VGA (93 photos) VGA (187 photos) 50/60Hz 1. After camera is activated, press Mode 7 times and CSTN will display "50". If it is not operated within 3 seconds, LCD will return to Preview status from Menu options. Flash After camera is activated, press Mode 8 times and press Shutter within 3 seconds to shift to Flash mode. The camera begins charging and LED lights up in about 6 seconds, indicating it is fully charged. LED will light up again in about 6 seconds (the duration of LED lighting up varies depending on different charging duration due to battery status) and it is ready to take photos. [. . . ] Run videoconference software (such as Microsoft Netmeeting ) on your computer. Type in recipient's IP address in the address field and dial to call. Please turn off all power sources (including USB cable and batteries), replace with new batteries after 10 seconds and then resume operation. [. . . ]