User manual APPLE MACBOOK PRO 15 INCH 2012 QUICK START GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual APPLE MACBOOK PRO 15 INCH 2012. We hope that this APPLE MACBOOK PRO 15 INCH 2012 user guide will be useful to you.


APPLE MACBOOK PRO 15 INCH 2012 QUICK START GUIDE: Download the complete user guide (2661 Ko)

You may also download the following manuals related to this product:

   APPLE MACBOOK PRO 15 INCH 2012 QUICK START GUIDE (4682 ko)
   APPLE MACBOOK PRO 15 INCH 2012 QUICK START GUIDE (4493 ko)
   APPLE MACBOOK PRO 15 INCH 2012 QUICK START GUIDE (4486 ko)
   APPLE MACBOOK PRO 15 INCH 2012 QUICK START GUIDE (6517 ko)
   APPLE MACBOOK PRO 15 INCH 2012 QUICK START GUIDE (6565 ko)
   APPLE MACBOOK PRO 15 INCH 2012 QUICK START GUIDE (4478 ko)
   APPLE MACBOOK PRO 15 INCH 2012 QUICK START GUIDE (4481 ko)
   APPLE MACBOOK PRO 15 INCH 2012 QUICK START GUIDE (4492 ko)
   APPLE MACBOOK PRO 15 INCH 2012 QUICK START GUIDE (4490 ko)
   APPLE MACBOOK PRO 15 INCH 2012 QUICK START GUIDE (4491 ko)
   APPLE MACBOOK PRO 15 INCH 2012 QUICK START GUIDE (4484 ko)
   APPLE MACBOOK PRO 15 INCH 2012 QUICK START GUIDE (4293 ko)

Manual abstract: user guide APPLE MACBOOK PRO 15 INCH 2012QUICK START GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] Unplug all other cables from the computer except the power cord. 073-0554 Rev. (Figure 1) Figure 1 Power Mac G4 (QuickSilvers) Power Mac G4 (Mirrored Drive Doors/FW 800) Important: To avoid electrostatic discharge, always ground yourself by touching the port access covers before you touch any parts or install any components inside the computer. To avoid static electricity building back up in your body, do not walk around the room until you have completed the installation and closed the computer. Warning: The power supply in your computer is a high-voltage component and should not be opened for any reason, even when the computer is off. [. . . ] If the power supply needs service, contact your Apple reseller or Apple Authorized Service Provider. To avoid scratching the case, lower the panel onto a soft, clean cloth. Warning: If you see any lights glowing on the main logic board, the computer has not been shut down. Close the side access panel and shut down the computer before proceeding. Power Mac G4 ATA Hard Drive - 2 Removing the Drive from the QuickSilver Models 1 2 Disconnect the ATA ribbon cable (Figure 2A) and power cable (Figure 2B) from the hard drive. Using a Phillips screwdriver, remove the drive carrier mounting screw (Figure 2C). Tilt the drive carrier (Figure 2D) and carefully remove the drive from the computer. Figure 2 D C B A 3. Remove the carrier screws and remove the drive from the carrier. Power Mac G4 ATA Hard Drive - 3 Installing the Drive in the QuickSilver Models 1. Position the replacement drive on the drive carrier so that the ribbon cable and power cable connectors align with the end of the carrier that will be mounted to the chassis (the end with the screw hole). Attach the carrier to the drive with the screws you removed from the original drive. Figure 8 Installing the Drive in the Mirrored Drive Doors/FW 800 Models Note: In the Mirrored Drive Doors/FW 800 models, there are two hard drive carriers: a front bay and a back bay. Choose the procedure based on the location of the drive you are replacing. Front Bay 1. Important: Align the center mounting peg on the top of the carrier with the center channel on the underside of the optical drive shelf. Then align the two remaining pegs, and slide the carrier in until the pegs engage and the right side lever clicks into place. Before closing the side access panel, make sure the P4 and P5 power cable connectors are either attached to the hard drives or tucked inside the hard drive carrier. Note that the mounting pegs on the back of the carrier align with the notches in the chassis. Rotate the drive, and align the carrier pegs with the notches in the chassis. Press the carrier in and down until the mounting pegs engage and the left side lever clicks into place. Raise the side access panel, lift the latch, and press the panel against the case until it snaps securely into place. [. . . ] Press the carrier in and down until the mounting pegs engage and the left side lever clicks into place. Raise the side access panel, lift the latch, and press the panel against the case until it snaps securely into place. Warning: Never turn on your computer unless all of its internal and external parts are in place and it is closed. Operating the computer when it is open or missing parts can damage your computer or cause injury. Power Mac G4 ATA Hard Drive - 9 Apple Computer, Inc. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE APPLE MACBOOK PRO 15 INCH 2012




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual APPLE MACBOOK PRO 15 INCH 2012 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.