User manual AMERICAN AUDIO WM-16HH

[. . . ] 16 Channel Selectable Wireless Microphone or Lavalier WM-16HH or WM-16LAV User Guide 11/07 6122 S. 90040 (323) 582-2650 Fax (323) 582-2610 web: www. AmericanAudio. us WM-16TM ELECTRICAL SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE REFER SERVICE TO YOUR AUTHORIZED AMERICAN AUDIO® SERVICE TECHNICIAN. [. . . ] Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your wireless microphone for any damage and be sure all equipment necessary to operate the wireless microphone has arrived intact. In the event damage has been found or parts are missing, please contact our toll free customer support number for further instructions. Please do not return the wireless microphone to your dealer without first contacting customer support. The WM-16HHTM and WM-16LAVTM carries a ONE year (365 days) limited warranty. Please fill out the enclosed warranty card to validate your purchase and warranty. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R. A. ) number. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. Please contact American Audio® customer support at (800) 322-6337 for a R. A. number. WARRANTY INFORMATION WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO WATER OR MOISTURE NOTE: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electrical appliances such as radios and televisions, use shielded cables and connectors for connections. ©American Audio® - www. americanaudio. com - WM-16TM Instruction Manual Page 3 WM-16TM INTROdUCTION Introductions: Congratulations and thank you for purchasing the American Audio® WM-16HHTM or WM-16LAVTM. These wireless systems are a representation of American Audio's continuing commitment to produce the best and highest quality audio products possible at an affordable price. Please read and understand this manual completely before attempting to operate your new wireless microphone. Please carefully read and understand the instructions in this manual thoroughly before attempting to operate this unit. These instructions contain important safety information regarding the use and maintenance of this unit. Take special care to follow all warning symbols and labels both on the unit and printed in this manual. Customer Support: American Audio® provides a toll free customer support line, to provide set up help and answer any question should you encounter problems during your initial set up or operation. You may also visit us on the web at www. americanaudio. com for any comments or suggestions. Voice: (800) 322-6337 Fax: (323) 582-2941 E-mail: support@americandj. com To purchase parts online visit http://parts. americandj. com Caution!There are no user serviceable parts inside the receiver and microphone or lavalier. Do not attempt any repairs yourself, without being instructed to do so by an authorized American Audio service technician. In the unlikely event your microphone or receiver may require service, please contact American Audio® customer support. diversity A & B Indicators - These LED's indicate that the antennas are receiving an RF Signal. [. . . ] Plug the receiver in and then switch the power to "On" on the top of the lavalier bodypack. Note: Make sure the squelch on the receiver is turned the minimum before switching on the power. The lavalier's dipswitches are located on the side of the lavalier. If the signal from the mic is being received by the receiver the Diversity LED's should light up. [. . . ]