User manual AMERICAN AUDIO VERSAPORT

[. . . ] Turn your music from analog to digital with ease! Versaport User Instructions Features: 16-bit/48 kHz AD/DA Converter USB bus - powered, adapter-free Headphone & Mic Jack Mic Level Knob RCA analog connections USB 1. 1 Compliant 2 Channel - 2 Input & 2 Output Line/Phone Selector Monitor Level Knob 4/08 6122 S. 90040 www. americanaudio. us Thank you for purchasing this ©American Audio® product. [. . . ] Connect your desired sound equipment; record player, CD/Mp3/WMA player, mixer, effect player, cassette deck or radio, to the RCA input jacks on the Versaport. You can connect headphones to the headphone jack and adjust the volume using the Headphone Volume knob. When a record player is connected to Input 2 the Line In/Phono switch must be in the phone position (pushed in). Using the Versaport's RCA output jacks you can connect to a amplifier, mixer, sound effect machine, or speakers with a built-in amplifier. To adjust the Input recording volume: Open the Audio properties in your computer and select Recording. Adjust the "Wave In" to your desired level. VersAPorT InTrodUcTIon And seT UP ©American Audio® - www. americanaudio. us - Versaport Instruction Manual Page 2 VersAPorT 1 2 3 4 conTroLs And FUncTIons 5 9 8 7 6 1. Microphone Volume Knob - This knob can adjust the microphone output volume. USB Cable - Use this cable to connect to the USB port of your computer. RCA Output Jacks - With these jacks you can connect the Versaport to speakers with a built-in amplifier, mixers or effect machines. Headphone Jack - You can connect your headphones to this jack to moniter sound. Headphone Volume Knob - This knob allows you to adjust the headphone volume output level. The button is used to select the input source assigned to the Input 2 jacks. [. . . ] You may also visit us on the web at www. AmericanAudio. us for any comments or suggestions. Voice: (800) 322-6337 Fax: (323) 582-2610 E-mail: support@AmericanAudio. us [. . . ]