User manual ALPINE IVA-W502R

[. . . ] FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN AUTOMÓVILES/SOLO PER L'UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/ /DO UYCIA TYLKO W SAMOCHODZIE/ R EN Mobile Media Station IVA-W505R IVA-W502R DIGITAL VIDEO DE FR ES · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] When ON is set in "Setting the Navigation Mode" (page 40), the item is displayed. Not displayed when OFF is set in "Setting the AUX Mode" (page 40). Not displayed when OFF is set in "Setting the Navigation Mode" (page 40). Not displayed when OFF is set in "Setting the AUX+ Mode" (page 41). Switching the function of the remote sensor For optional remote control operation, the remote sensor of the external device (monitor, etc. ) can be switched, as you prefer. Setting item: REMOTE SENSOR Setting contents: FRONT / REAR 4 FRONT: REAR: Touch [ ] to return to the previous screen. Touch and hold [ ] for at least 2 seconds to return to the main source screen that was displayed before the setup operation was started. · Immediately after changing the settings of System Mode (while the system is writing data automatically) do not turn the ignition key (engine key) to OFF. Otherwise, the settings may not be changed. The remote sensor of this unit is effective. The remote sensor of the external monitor connected to AUX OUT of this unit becomes effective. The remote control operates the source connected to the AUX OUT terminals. · If a touch panel rear monitor (connected to the Alpine rear monitor output via the Monitor control lead) is touched, the command is executed regardless of the remote control sensor switch setting. Note, however, that the remote control sensor that has been set takes priority if it has been 5 seconds since last touching the panel. · When an optional DVD changer or DVD player is connected, and the remote control sensor is set to REAR, some soft button operations ( [ ] STOP, etc. ) cannot be performed. In this case, set the remote control sensor to FRONT. 39-EN Setting the Rear Camera Input With a rear camera connected, rear view video is output to the monitor. Setting item: CAMERA IN Setting contents: OFF / NTSC/PAL The CAMERA source is not displayed on the VISUAL selection screen. NTSC/PAL: Even if the shift lever is not set to reverse (R), the rear pictures are output by selecting the CAMERA source. OFF: Setting the AUX Mode Setting item: AUX IN Setting contents: OFF / ON / DVD / GAME / TV / DVB-T / EXT. ON: AUX source is displayed. · By shifting to reverse (R), the rear pictures are output. This function is effective when the reverse wire is properly connected. · To apply the setting, set to VISUAL "Setting the VISUAL Soft Button" (page 41). · OFF is not displayed when the optional DVD player or DVD changer is connected. During SYSTEM setup, although the AUX name can be changed, it is not displayed on the source selection screen. · When OFF is selected, the settings related to AUX cannot be changed from this unit. · The selected source name is displayed instead of AUX source name. · Only when an Alpine TV tuner is connected, you can operate the displayed function guide from this unit. Setting the Navigation Mode When you connect an optional navigation equipment, set it to ON. Setting item: NAV. IN Setting contents: OFF / ON OFF: Navigation source is not displayed. The settings related to the navigation can not be changed from this unit. [. . . ] This lead outputs the controlling signals from the remote control. Remote Control Input Lead (White/Brown) Connect the external Alpine product to the remote control output lead. Rear Output/Input RCA Connectors It can be used as Rear Output or Input RCA Connectors. Reverse Lead (Orange/White) Use only when a back-up camera is connected. This lamp illuminates when the transmission is shifted into reverse (R). With this lead properly wired, the video picture automatically switches to the back-up camera whenever the car is put into reverse (R). Front Output/Input RCA Connectors It can be used as Front Output or Input RCA Connectors. Subwoofer RCA Connectors RED is right and WHITE is left. System Switch When connecting an equalizer or divider using Ai-NET feature, place the two switches in the EQ/DIV position. · Be sure to turn the power off to the unit before changing the switch position. Monitor Control Lead (White/Pink) Connect this to the Monitor Control Lead of the touch panelcompatible rear monitor. USB Connector AUX I/O Camera In Connector FULL SPEEDTM Connection Cable (KCE-422i) (sold separately) GPS Antenna Receptacle (IVA-W505R only) To GPS Antenna (sold separately). Power Supply Connector Ai-NET Cable (Included with CD Changer) Remote Turn-On Lead (Blue/White) Connect this lead to the remote turn-on lead of your amplifier or signal processor. Steering Remote Control Interface Connector To steering remote control interface box. [. . . ]