User manual ALPINE IDA-X100

[. . . ] · ISTRUZIONI PER L 'USO Si prega di leggere prima di utilizzare il attrezzatura. · ANVÄNDARHANDLEDNING Innan du använder utrustningen bör du läsa igenom denna användarhandledning. FR ES IT ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC. Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. [. . . ] · "No Support" is displayed when text information is not compatible with the iDA-X001. Multi-Changer Selection (Optional) When using KCA-410C (Versatile Link Terminal), you can connect two changers and two external outputs (AUX). 1 2 Press SOURCE/ CHG mode. on this unit to activate the CD Playback Press BAND/TA to activate the CD Changer Selection mode. The CD Changer Selection mode remains active for several seconds. 1 2 Press SOURCE/ CHG mode. Press or to select the USB Memory or CD 3 to select the desired track (file). Press BAND/TA until the desired CD Changer appears on the display. Returning to the beginning of the current track (file): Press . Fast backward: Press and hold . · For further details about the external input (AUX) when using KCA-410C, see "Setting the AUX Mode (V-Link)" on page 23. Advancing to the beginning of the next track (file): Press . Fast forward: Press and hold . 3 To pause playback, press Pressing / / . again will resume playback. · WMA format files that are protected by DRM (Digital Rights Management), AAC format files that have been purchased from iTunes Music Store and files that are copy-protected (copyright protection) cannot be played back on this unit. · The playback time may not be correctly displayed when a VBR (Variable Bit Rate) recorded file is played back. 16-EN Repeat Play M. I. X. (Random Play) 1 2 3 Press FUNC. /SETUP. The Function screen is displayed. 1 2 3 4 Press FUNC. /SETUP. The Function screen is displayed. Press ENT. The repeat mode is activated. Turn the Center Jog Dial to select M. I. X. mode is activated. Turn the Center Jog Dial to select the Repeat playback mode. USB memory mode : Repeat One Folder Off : Only a track is repeatedly played back. : Repeat mode is turned off. Turn the Center Jog Dial to select the M. I. X. Folder All Off : Only files in a folder are played back in random sequence. mode is turned off. CD Changer mode : Repeat One Folder * Disc Off : Only a file is repeatedly played back. One : All files in a disc are played back in random sequence, and playback shifts to the next disc. · Press and hold BACK for at least 2 seconds in the search mode to cancel. · While in the File/Folder Name Search mode, press BACK to switch to the previous mode. · If the Center Jog Dial is turned two steps and held, the display can be changed continuously. · "ROOT" is displayed for the root folder which does not have folder name. This device may not play back correctly depending on sampling rates. 18-EN ID3 tags/WMA tags This device supports ID3 tag v1 and v2. 2. 0, v2. 3. 0 and WMA tag. The following files do not support compression, coding, grouping or non-synchronization. WMA tag is not supported for the following files, Windows Media Audio Professional, Windows Media Audio 9 Voice or Windows Media Audio 9 Pro Lossless. If tag data is in an MP3/WMA/AAC file, this device can display the title (track title), artist name, and album name ID3 tag/WMA tag data. This device can only display single-byte alphanumeric characters and the underscore. The tag information may not be correctly displayed, depending on the contents. Playing back MP3/WMA/AAC MP3/WMA/AAC files are prepared, and then written to USB memory. A USB memory device can hold up to 10000 files/1000 folders (including Root Folders). [. . . ] Slide the mounting sleeve into the dashboard and fix it with the metal shackles. 2 Metal Mounting Strap Screw Bolt Stud Hex Nut (M5) Mounting Bracket This unit 30-EN USB cable connection Insert a USB cable into the unit, and fix with a lock screw. USB memory Connection (sold separately) Connect USB memory Connect USB memory to USB cable. USB cable USB memory USB Cable Remove USB memory Pull out USB memory squarely from the USB cable. iPod Connection (sold separately) USB connection Connect USB cable to an iPod with iPod Dock interface cable. USB cable USB memory USB cable iPod Dock interface Cable · When removing USB memory, pull it out straight. · If sound is not output or USB memory is not recognized even when USB memory is connected, remove USB memory once, then connect it again. · Change to a source other than the USB memory mode, then remove the USB memory. If the USB memory is removed in the USB memory mode, data may be damaged. Direct connection Connect iPod direct connector to an iPod with FULL SPEEDTM connection cable (KCE-422i). FULL SPEEDTM Connection Cable (KCE-422i) (sold separately) Remove the iPod Remove the iPod from FULL SPEEDTM Connection Cable or iPod Dock interface cable. · If USB is connected, after the unit has been changed to a source other than the iPod, remove the iPod. [. . . ]