User manual AEG BKS18/0

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG BKS18/0. We hope that this AEG BKS18/0 user guide will be useful to you.


AEG BKS18/0 : Download the complete user guide (1934 Ko)

Manual abstract: user guide AEG BKS18/0

Detailed instructions for use are in the User's Guide.

[. . . ] The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. [. . . ] Do not operate the saw if lower guard does not move freely and close instantly. Read all safety warnings and all instructions, including those given in the accompanying brochure. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. SAFETY INSTRUCTIONS Danger: Keep hands away from cutting area and the blade. € Less than a full tooth of the blade teeth should be visible below the workpiece. It is important to support the work properly to minimize body exposure, blade binding, or loss of control. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting tool may contact hidden wiring. Cutting accessory contacting a „live“ wire may make exposed metal parts of the power tool „live“ and could give the operator an electric shock. This improves the accuracy of cut and reduces the chance of blade binding. Always use blades with correct size and shape (diamond versus round) of arbour holes. Blades that do not match the mounting hardware of the saw will run eccentrically, causing loss of control. The blade washers and bolt were specially designed for your saw, for optimum performance and safety of operation. Causes and operator prevention of kickback: - kickback is a sudden reaction to a pinched, bound or misaligned saw blade, causing an uncontrolled saw to lift up and out of the workpiece toward the operator; - when the blade is pinched or bound tightly by the kerf closing down, the blade stalls and the motor reaction drives the unit rapidly back toward the operator; make sure it moves freely and does not touch the blade or any other part, in all angles and depths of cut. If the guard and the spring are not operating properly, they must be serviced before use. Lower guard may operate sluggishly due to damaged parts, gummy deposits, or a build-up of debris. Lower guard may be retracted manually only for special cuts such as “plunge cuts” and “compound cuts. € Raise lower guard by retracting handle and as soon as blade enters the material, the lower guard must be released. Always observe that the lower guard is covering the blade before placing saw down on bench or floor. An unprotected, coasting blade will cause the saw to walk backwards, cutting whatever is in its path. Be aware of the time it takes for the blade to stop after switch is released. Do not use saw blades not corresponding to the key data given in these instructions for use. Do not dispose of used battery packs in the household refuse or by burning them. [. . . ] accessory - Not included in standard equipment , available as an accessory. Do not dispose of electric tools together with household waste material!In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. Winnenden, 2011-02-21 Rainer Kumpf Manager Product Development Authorized to compile the technical file BATTERIES New battery packs reach full loading capacity after 4 - 5 chargings and dischargings. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG BKS18/0




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG BKS18/0 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.