User manual AEG BBS 1100

[. . . ] MAINTENANCE The ventilation slots of the machine must be kept clear at all times. Should components need to be exchanged which have not been described, please contact one of our AEG service agents (see our list of guarantee/service addresses). [. . . ] An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. Always disconnect the plug from the socket before carrying out any work on the machine. Read all safety warnings and all instructions, including those given in the accompanying brochure. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Hold power tool by insulated gripping surfaces, because the belt may contact its own cord. Cutting a "live" wire may make exposed metal parts of the power tool "live" and shock the operator. Appliances used at many different locations including open air must be connected via a residual current device (FI, RCD, PRCD). It is recommended to wear gloves, sturdy non slipping shoes and apron. Sawdust and splinters must not be removed while the machine is running. Always disconnect the plug from the socket before carrying out any work on the machine. When working oak or beech wood, stones, paint, which could contain lead or other harmful chemicals). Use a dust absorption system and wear a suitable dust protection mask. [. . . ] Att skada en spänningsförande ledning kan leda till att slipmaskinens metalldelar blir spänningsförande, vilket kan leda till en elektrisk stöt. Får endast anslutas till 1-fas växelström och till den spänning som anges på dataskylten. [. . . ]