User manual ACER ASPIRE ES1-711G

[. . . ] L, Via Lepetit, 40, 20020 Lainate (MI) Italy Aspire ES1-711 2014 36 kWh/year 56 kWh/year adjustments when discrete graphics cards Not applicable are enabled (from 1 July 2014) ETEC allowance with capability adjustments when discrete graphics cards are disabled (from 1 January 2016) ETEC allowance with capability 27 kWh/year 68 kWh/year 38 kWh/year adjustments when discrete graphics cards Not applicable are enabled (from 1 January 2016) Whether all discrete graphics card are No enabled during the test Whether switchable graphics mode with Not applicable UMA is driving the display during the test ETEC of highest power-demanding 13. [. . . ] 0 B 400 cycles 2~ 8 GB 1 piece 0 piece 0 piece 0 piece Not applicable Yes 0 mg 2~ 8 GB 1 piece 0 piece 0 piece 1 piece G2 Yes 3. 0 B 400 cycles 0 mg Measurement methodology for ETEC COMMISSION REGULATION (EU) No 617/2013 of 26 June 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for computers and computer servers: ANNEX II Ecodesign requirements and timetable: 1. Measurement methodology for sleep mode EN 62623:2013 — Desktop and notebook computers — Measurement of energy consumption: 5. Method for determination of sound power levels of equipment under essentially free-field conditions over a reflecting plane; Annex C. EN 61960:2011 Secondary cells and batteries containing alkaline or other nonacid electrolytes — Secondary lithium cells and batteries for portable applications: 7. Measurement methodology for battery loading cycles Sequence of steps for achieving a stable condition with respect to power demand Description of how sleep mode was selected or programmed EN 62623:2013 — Desktop and notebook computers — Measurement of energy Description of how off mode was selected consumption: or programmed 5. [. . . ] Sequence of events required to reach the mode where the equipment automatically Not applicable changes to off mode The length of time after a period of user inactivity in which the computer automatically reaches a power mode that 30 minutes has a lower power demand requirement than sleep mode The length of time before the display sleep mode is set to activate after user inactivity User information on the energy-saving potential of power management functionality User information on how to enable the power management functionality Test parameter for ambient temperature Test parameter for test voltage Test parameter for frequency Test parameter for total harmonic distortion of the electricity supply system 10 minutes http://www. [. . . ]