User manual ACER ASPIRE G600

[. . . ] Wait a minute Did you know your Acer Aspire comes with incredible multimedia software that was designed to show you all the cool stuff your computer can do?- If you're reading this because you're having trouble with your computer, check the "Need Help?" section in this book. ) Hey! Copyright Acer and the Acer logo are registered trademarks and Aspire is a trademark of Acer Inc. Microsoft Windows and the Windows Logo are registered trademarks of Microsoft Corporation. All other brands/product names are trademarks or registered trademarks of their respective companies. [. . . ] Gently push the computer's side panel slightly backward (a), then pull it upward to remove it from the chassis (b). 4 35 Replacing the Left Panel Cover After you install the system components into the housing, you must replace the left panel cover. 1 2 Align the side panel to the housing frame (a), gently push it in (b), then slide it forward into place (c). Use the thumbscrew you have previously removed, turning it clockwise, to secure the side panel. 36 Connecting USB Devices The Universal Serial Bus (USB) on your Aspire allows for easy and convenient expansion options. With it, installing devices such as digital cameras, scanners, and joysticks is a breeze. Two USB connectors are located on the back of your computer while another two are located inside the multimedia port bay in front of your computer. Note: Most USB devices have a built-in USB port which allows you to daisy-chain other devices. 37 Need Help? Acer is dedicated to bringing you a reliable and easy to maintain computer. Please refer to the troubleshooting tips in this section to help diagnose and solve your problems. Troubleshooting - General Here are some answers to commonly asked questions: The Start button is not displayed on screen. The taskbar has either been resized too small or it is in a hidden location. To retrieve the taskbar: 1 Press the Start key on the keyboard. 2 3 4 Press the Esc key to close the Start menu. (The taskbar is still selected. ) Press the Alt + Spacebar keys together and select "size. " Use the Arrow keys to resize the taskbar to the desired size and press the Enter key when done. My computer will not shut off completely. For more information, refer to "Turning off your Aspire" on page 4. My CD or DVD does not always work, and it does not eject all the time. If cleaning the CD or DVD doesn't correct the problem, call Acer Technical Support. 38 My modem connects, but there is no dial tone. 1 Check to see if the phone lines (in and out) are properly connected. Sometimes the line to the phone and the line to the wall jacks are reversed. If needed, refer to the Easy Setup poster that came with your Aspire computer. Ensure that the line from the wall jack is plugged into the jack on the back of the computer labeled Line or Wall. Ensure that the line from the wall jack to the computer is tightly plugged in on each end. If the modem still doesn't work, disconnect any phones or other equipment that may be on the same line. If the modem still doesn't work, temporarily disable any special services on the line, such as call waiting. 2 1 2 3 4 My modem does not work. My monitor remains dark when system is turned on 1 2 3 Make sure that the monitor power indicator is lit. If the problem still persists, ensure that the monitor is plugged in and the cable from the monitor to the com puter is securely attached. My monitor will not turn on. 1 2 If the monitor Power button light is not lit, verify that the monitor is plugged in to a power source. If the monitor Power button light is lit, but is blinking instead of steady, verify that the monitor video cable is fully connected to the computer. If necessary, unplug the computer and monitor, then inspect the monitor cable connector for bent or broken pins. 3 4 39 My sound is bad or uneven or my system has no sound. [. . . ] Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/television technician for help. Notice 1: The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Notice 2: Shielded interface cables, if any, must be used in order to comply with the emission limits. Fax/Modem and FCC Compliance This equipment complies with Part 68 of the FCC Rules. On this equipment is a label that contains, among other information, the FCC registration number for this equipment. [. . . ]