User manual 3R SYSTEM HT-1100

[. . . ] / to select the day, month and year fields successively. 1 2 4 Press 5 Press +/- to change the value of each field. 7 Press »» A time setting menu is displayed. 3 Turn on • Press . »» For first-time users, a menu for date and time setting appears (See ‘’Get started - Set the date and time). »» The backlight on the display panel turns off. 8 Press +/- to change the value of each field. [. . . ] • Or press to cancel and go back to viewfinder mode. Charge the built-in battery 1 Press 2 3 at the bottom of the camcorder to eject the USB connector. »» The status indicator on the shutter button starts flashing in orange. Wait until the status indicator stops flashing and turns to green steadily. »» The built-in battery is fully charged. Tip •• The camcorder is fully charged for first-time use. •• It takes about 3 hours to fully charge the built-in battery via the PC. 10 EN 4 Use your camcorder Record video 1 2 3 Switch the mode switch button to . »» The selected resolution and remaining recording time are displayed on the display panel. »» A red time indicator is displayed on the display panel. »» The status indicator on the shutter button starts flashing in red. »» [Recording saved!] is displayed briefly. Play 1 In viewfinder mode, press to enter play mode. / to select a picture or video clip 2 Press 3 If the selected file is a video clip, press to start play. Delete a file 1 In play mode, press / to select a file. »» [Deleted!] appears briefly. 4 Preview • In play mode, press -. with lots of motions in the video, or a lot of panning), the camcorder will use more memory. This is done to maintain the video quality, but will increase the usage of memory. •• The camcorder turns off automatically 15 minutes after it is connected to a computer. You can press to turn it on again. Why do my video/pictures look blurry?•• During video capture, do not move the camcorder too fast. •• You can charge the camcorder via the USB pop-out connector. You can also plug the camcorder via the pop-out USB into a USB charger. The camcorder charge time when connected to your PC/laptop is 3 hours. CAM102B can be charged via regular USB adaptors, which are readily available in electronic stores. The USB pop-out connector is strong enough to support the camcorder when it is plugged into the USB port. The camcorder works great with the iMovie software, which is part of the iLife package that comes with your Mac. [. . . ] •• To play back on TV, please use an HDMI connector (mini HDMI to standard HDMI) if your TV accepts HDMI input. •• The camcorder comes without a lens cover, keeping it simple to use and fussfree. It is made of robust material that doesn’t scratch under normal usage. A travel pouch and a lens cloth are provided, allowing you to keep the camcorder clean. [. . . ]