User manual 3COM SSII ADVANCED RPS Y CABLE TYPE 3 INSTALLATION GUIDE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual 3COM SSII ADVANCED RPS Y CABLE TYPE 3. We hope that this 3COM SSII ADVANCED RPS Y CABLE TYPE 3 user guide will be useful to you.
 |
3COM SSII ADVANCED RPS Y CABLE TYPE 3 INSTALLATION GUIDE: Download the complete user guide (719 Ko) |
Manual abstract: user guide 3COM SSII ADVANCED RPS Y CABLE TYPE 3INSTALLATION GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] SUPERSTACK® 3 ADVANCED RPS TYPE 3 `Y' CABLE (3C16077) INSTALLATION GUIDE
For installation by suitably qualified service personnel only.
CAUTION: An energy hazard may exist on the Type 3 Power Module DC connector when the Module is in the Advanced RPS chassis. This guide provides all the information you need to connect a Type 3 Power Module (3C16075) to a SuperStack 3 unit using a SuperStack® 3 Advanced RPS Type 3 `Y' cable (3C16077). [. . . ] Vous ne devez en aucun cas connecter le cable à une entrée non RPS. Il en resulterait des dommages prejudiciales aux produits RPS et SuperStack 3. Vor Anschluß des `Y' Kabels lesen Sie bitte die in der Bedienungsanleitung für Power Module Typ 3 enthaltenen Sicherheitsinformationen.
Connecting the `Y' Cable
3
Verbinden sie das Kabel nur mit dem vorgesehenen RPS Ausgang. Bei nicht Beachtung wird das RPS und der SuperStack 3 beschädigt.
Connecting the `Y' Cable
The SuperStack 3 Advanced RPS and its modules can be "hot-connected" to SuperStack 3 units, that is, you do not need to remove power from the chassis or other units to connect the cables. Before connecting the cable, check that the power demand of the product does not exceed the capacity of the Type 3 Power Module you are connecting. This information is given in the: Type 3 Power Module Installation Guide (DUA1607-5AAA0X). s If you are unable to find the information, or are unsure, please contact your supplier. To connect the `Y' cable (3C16077) to your SuperStack 3 unit: 1 Ensure the Type 3 Power Module is in the Advanced RPS chassis before connecting or disconnecting the optional `Y' DC cable. CAUTION: An energy hazard may exist on the Type 3 Power Module DC connector when the Module is in the Advanced RPS chassis. 2 Check that you are about to connect Type 3 Power Modules (3C16075) with the Type 3 `Y' cable (3C16077). 3 Connect the male connector to the Redundant Power System socket on the rear of the SuperStack 3 unit. 4 Connect one female connector to each of two Type 3 Power Module outlets fitted into the rear of the Advanced RPS chassis. [. . . ] Unless otherwise indicated, 3Com registered trademarks are registered in the United States and may or may not be registered in other countries. Other brand and product names may be registered trademarks or trademarks of their respective holders. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE 3COM SSII ADVANCED RPS Y CABLE TYPE 3
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual 3COM SSII ADVANCED RPS Y CABLE TYPE 3 will begin.