User manual 3COM SS II 100BASE FX TRANSCEIVER

[. . . ] To qualify for the lifetime limited warranty and the advance hardware exchange, you must submit the appropriate product warranty registration card to 3Com, otherwise this product will be warranted for a period of one (1) year without advance hardware exchange. HARDWARE: 3Com warrants its hardware products to be free from defects in workmanship and materials, under normal use and service, for the following lengths of time from the date of purchase from 3Com or its Authorized Reseller: ® 100BASE-FX TRANSCEIVER MODULE USER GUIDE W ARNING: Network adapters: Other hardware products: Spare parts and spares kits: Lifetime One year unless otherwise specified above 90 days The 100BASE-FX Transceiver Module The 100BASE-FX Transceiver Module (3C16681) is designed for use with 3Com's SuperStack® II range of units. The Module can be installed in a suitable unit with a Fast Ethernet (100Mbps) transceiver port slot. At present, suitable units are: s Optical Safety If a product does not operate as warranted above during the applicable warranty period, 3Com shall, at its option and expense, repair the defective product or part, deliver to Customer an equivalent product or part to replace the defective item, or refund to Customer the purchase price paid for the defective product. Any replaced or repaired product or part has a ninety (90) day warranty or the remainder of the initial warranty period, whichever is longer. [. . . ] TO THE FULL EXTENT ALLOWED BY LAW, THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, TERMS, OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES, TERMS, OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. 3COM NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS. WARRANTIES EXCLUSIVE: When installed in a suitable unit, the Module provides a single 100Mbps Fast Ethernet fiber port. You can use this port to provide a high-speed connection to the rest of your network infrastructure, or to a local server or endstation. Examples of network configurations, information about configuring ports through management, and more information about Fast Ethernet configuration rules can be found in the unit's user guide. L'information de Sécurité Importante AVERTISSEMENT: 3COM SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER'S OR ANY THIRD PERSON'S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD. TO THE FULL EXTENT ALLOWED BY LAW 3COM ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN IF 3COM OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT 3COM'S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. LIMITATION OF LIABILITY . L'installation et l'enlèvement de l'unité doivent être faits seulement par le personnel qualifié. Avant d'installer le module dans une unité ou de l'en retirer, vous devez d'abord déconnecter les alimentations électriques de l'unité. Pour plus de details sur les instructions de sécurité, veuillez vous reférer au guide utilisateur qui accompagne cette unité. AVERTISSEMENT: La sécurité optique. Important Safety Information W ARNING: Some countries, states, or provinces do not allow the exclusion or limitation of implied warranties or the limitation of incidental or consequential damages for certain products supplied to consumers or the limitation of liability for personal injury, so the above limitations and exclusions may be limited in their application to you. This warranty gives you specific legal rights which may vary depending on local law. GOVERNING LAW: This Limited Warranty shall be governed by the laws of the state of California. Tel: (408) 764-5000, 9/1/96 3Com Corporation, 3Com, SuperStack, and Transcend are registered trademarks of 3Com Corporation. Other brand and product names may be registered trademarks or trademarks of their respective holders. © 3Com Ireland Installation and removal of the Module must be carried out by qualified personnel only. Before installing the Module into a unit, you must first disconnect the unit from the mains power supply. For full safety instructions, refer to the user guide that accompanies the unit. Part No. DUA1668-1AAA01 Published May 1997 Sous les conditions de visionnement ordinaires, il n'y a pas de danger à l'oeil à cause de la diode électroluminescente d'émission. C'est recommandé, cependant, que la diode électroluminescente ne soit pas examinée avec aucun appareil de grossissement pendant qu'elle est sous tension. C'est recommandé que le port de fibre Tx et les fins de câble du fibre ne soient jamais directement examinées pendant qu'ils soient sous tension. Wichtige Sicherheitsinformationen W ARNUNG: Ein- und Ausbau des Gerätes ist nur von Fachpersonal vorzunehmen. Vor der Installation des Module in das Gerät muß das Gerät vom Netz getrennt werden. Bitte beachten Sie die Sicherheitsinformationen im Handbuch des Gerät. any other screws from the rear of the unit. Refer to the user guide supplied with the unit if uncertain of the position of the blanking plate. 3 . W ARNUNG: Optische Sicherheit. Unter normalen Umständen geht von der übertragenden LED keine Gefahr für die Augen aus. [. . . ] Ensure that the device at the far end of the segment is powered up and operating correctly. Check that all connectors on the fiber optic segment are correctly engaged. Clean the terminators by wiping them gently with a clean tissue or cotton bud moistened with a little ethanol. Dirty fiber terminators on the fiber optic segment will impair the quality of the light transmitted through the cable. Do not remove the Module from its packaging until you are ready to install it into the unit. [. . . ]